Step 1: Preparing a Location for the Printer
Figure 1
69.8 in (177.3 cm)
11.4 in
(29.0 cm)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
18.1 in |
|
|
|
|
|
|
|
| ||||
| 14.3 in |
|
| |||||||||
(46.0 cm) |
|
|
|
| ||||||||
|
| (36.3 cm) |
| |||||||||
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
19.5 in (49.5 cm)
33 in (83.8 cm)
41.4 in (105.2 cm) 48.65 in (123.57 cm)
ATop View (with optional
BFront View (with optional
This printer requires the following:
zSpace around the printer, as shown above
zSturdy, level floor surface
zA
zAn area with a recommended temperature range of 68° to 79° F (20° to 26° C), or an allowed temperature range of 59° to 86° F (15° to 30° C)
zAn area with a recommended humidity range of 20% to 50% relative humidity (RH), or an allowed humidity range of 10% to 80% RH
zLine voltage and frequency not varying more than 10% from the value stated on the printer regulatory label (located on the back of the printer)
4 | EN |