Turning on power
Turn the camera on by sliding the
•ON/OFFswitch to the right and then releasing it. The Memory/USB light will blink and then turn off when the camera
is ready.
R÷storlng previous settings
Some of the camera settings do not remain set when the camera is turned off. To restore all camera settings that were in effect when the camera was last turned off, hold down the OK button when you turn on the camera.
Choosing the anguag÷
The first time you turn the camera on, the following screen appears and prompts you to choose a language.
] Scroll to the language that you want by using the ,_ _T'buttons.
2Pressthe OK Button to select the highlighted language.
NOTE If you need to go back and
change this setting later, you can do this in the Setup menu. See Chapter 6: U_ing the _efup menu on page 67.
18 | hp photosmart 730 series user'smanual |