The following table helps explain the settings in more detail.
Icon Setting Description
Average Camera usesthe entire sceneregion to measure and calculate exposure. Usethis
setting when you want everything in the picture to be used equally when calculating exposure.
None Center- Camera usesthe centerof the sceneregion to W÷ight_J measure and calculate exposure. Thissetting is good to use when thesubject is in the centerof the frame. Exposurewill be based more on the
subject than on its surroundings. This is the default setting.
Spot | Camera usesa small area in the center of the |
| scene region to measureand calculate |
| exposure. Thiscan be useful in backlit scenes |
| or when the subject is very dark or light |
| compared to the restof the scene.When using |
| this setting, pressthe ShuHerbutton halfway |
| down to lock the exposure on the spot in the |
| center, then recomposethe sceneas desired. |
If the new setting is anything other than the default setting of
The new setting remains in effect until it is changed again or until the camera is turned off.
42 | hp photosmart 730 series user'smanual |