HP 730 manual Changing capture modes

Changing capture modes

The Male button on the top of the camera sets the camera to one of nine different capture modes. Each time you press the M_de button, the camera changes to the next capture mode. The sequence for the different settings is: Normal, Sdf_Timer, Bur#, Macro, Adion, Landscapo, ?orfra#, F2_6,F4_9,and then repeat.

NOTE Thesesettings do not have any effect on recording video clips unless specifically noted otherwise.

Each time you change the capture mode, an icon representing that capture mode appears in the Status LCD. If Livo Viow is on, the icon also appears in the Image Display. The following table describes these different icons.

	Camera automatically sdects focus,
	aperture and shutter speed. This is the
	default settingwhen the camera is first
	turned on.
Stir:Timer	Camera waits 10 secondsafter the Video
	button or Shunt button is pressedto take a
	video clip or a picture. SeeUsin9 stir-timer
	mode on page 35.
::Burst	Camera quickly takesmultiple still pictures
	(as long as the Shu_lerbutton is hen down).
	See Using burst mode on page 36.
iMacro	Camera takesextreme close-up pictures.

Chapter 2: Taking pictures and recording video clips 33