Displaying i ages on a TV
Imagesinyourcameracan easilybe displayedas a slideshow
on almostany TV (tdevision).
NOTE If you are using the HP 8886 camera dock to do this task, see the HP 8886 C_mero Dock User'sManual.
To connect the camera directly to a TV, you need an A/V (Audio/Video) cable. The A/V cable is included in the HP 8886 camera dock kit, or may be purchased separately (see Purchasingcamera accessories on page 102).
2Your camera will send either an NTSC or PALvideo signal to a TV. The NTSC format is used primarily in North America and Japan, while the PALformat is used primarily in Europe. This setting is done for you when you set the language of the camera. If you want to change the video signal format, change the TV Configuration setting inthe Setup menu. SeeTV configuration on page 70.
3Your camera will be the source for the TV signal (just like a VCR or a camcorder), so you must set the TV to take video input from an external video source (your camera) instead of the antenna or cable TV. Referto the TV user'smanual for directions on how to do this.
4Turn on the camera, then connect the A/V cable to the A/V inputs on the TV and to the TV connector on your camera.
Chapter 5: Unloading, printing, and displaying images | 65 |