HP 730 manual Getting started

Your Windows CD may also include bonus software from other manufacturers. To install any Bonus software:

Click S_ar_,click Run, and in the Own box, type X:\Bonus\se_up.exe (where X is the letter of your CD drive).

2Click OK, and then follow the on-screen instructions to install the bonus software.

M_cln_osh

] Close all programs and temporarily disable any virus protection software running on your computer.

2Insert the HP Photo & Imaging software CD into the CD drive of your computer.

3Double-dick the CD icon on the computer desktop.

4Double-click the installer icon, and then follow the on-screen instructions to install the software.

NOTE Before you can unload images from the camera to a Macintosh computer, you must first change the USB Configuration setting to Disk Drive in the Setup menu on the camera. See Chapter 6: Using _hesetup menu on page 67, and then see USB cor_figura_ion on page 69.

Your Macintosh CD may also include bonus software from other manufacturers. To install any Bonus software:

Double-click the Bor_usfolder icon.

2Double-click the installer icon for the bonus software.

3Follow the on-screen instructions to install the software.

Chapter 1: Getting started 21