HP 200 Unified Threat Management (UTM) Appliance Telnetting to the device without authentication

Figure 31 Telnetting to the device without authentication

Configuring password authentication for Telnet login

Step		Command	Remarks
1.	Enter system view.	system-view	N/A
2.	Enable Telnet server.	telnet server enable	By default, the Telnet server
			function is disabled.
3.	Enter one or multiple VTY	user-interface vty first-number	N/A
	user interface views.	[ last-number ]
4.	Enable password		By default, the authentication
		authentication-mode password	mode for the VTY user interfaces
	authentication.
			is scheme.
5.	Set a password.	set authentication password { cipher	By default, no password is set.
		simple } password
6.	Configure the user privilege	user privilege level level	The default level is 0.
	level for login users.
7.	Configure common settings	See "Configuring common VTY user	Optional.
	for VTY user interfaces.	interface settings (optional)."

The next time you attempt to Telnet to the device, you must provide the configured login password, as shown in Figure 32. If the maximum number of login users has been reached, your login attempt fails and the message "All user interfaces are used, please try later!" appears.

30