HP 200 Unified Threat Management (UTM) Appliance manual Logging in through SSH

Figure 34 Telnetting from the device to a Telnet server

To use the device to log in to a Telnet server:

Step		Command		Remarks
1.	Enter system view.	system-view		N/A
				Optional.
2.	Specify the source IPv4	telnet client source { interface		By default, no source IPv4 address
	address or source interface	interface-type interface-number ip		or source interface is specified.
	for outgoing Telnet packets.	ip-address }		The device automatically selects a
				source IPv4 address.
3.	Exit to user view.	quit		N/A
		•	Log in to an IPv4 Telnet server:
			telnet remote-host
			[ service-port] [ vpn-instance
			vpn-instance-name ] [ source	Use either command.
			{ interface interface-type	NOTE:
			interface-number ip
4.	Use the device to log in to a			Support for the telnet ipv6
			ip-address } ]
	Telnet server.	•	Log in to an IPv6 Telnet server:	command depends on the device
				model. For more information, see

telnet ipv6 remote-host[ -i	Getting Started Command
interface-type
	Reference.
interface-number ]
[ port-number] [ vpn-instance
vpn-instance-name ]

Logging in through SSH

SSH offers a secure approach to remote login. By providing encryption and strong authentication, it protects devices against attacks such as IP spoofing and plain text password interception. You can use an SSH client to log in to the device operating as an SSH server for remote management, as shown in Figure 35. You can also use the device as an SSH client to log in to an SSH server.

Figure 35 SSH login diagram

Table 7 shows the SSH server and client configuration required for a successful SSH login.

35