HP 200 Unified Threat Management (UTM) Appliance Configuring Acsei client on the firewall module

Configuring ACSEI client on the firewall module

	Step		Command	Remarks
1.		Enter system view.	system-view	N/A
2.		Enter interface view	interface interface-type	N/A
			interface-number
				Disabled by default.
				The Comware platform can run only one
3.		Enable the ACSEI client	acsei-client enable	ACSEI client, that is, the ACSEI client can
				be enabled on only one interface at a
				time. But the ACSEI client on the
				Comware platform and that on the
				firewall module can run simultaneously.
Displaying and maintaining ACSEI server and client

Task	Command	Remarks
On the network device:
Display ACSEI client summary.	display acsei client summary	Available in any view.
	[ client-id ]
Display ACSEI client information.	display acsei client info	Available in any view.
	[ client-id ]
On the firewall module:
Display ACSEI client information.	display acsei-client information	Available in any view.
Display current ACSEI client state.	display acsei-client status	Available in any view.

Example of monitoring and managing the firewall module from the network device

Network requirements

A firewall module is installed in slot 3 of the network device to detect the traffic passing the network device. The internal interface Ten-GigabitEthernet 3/0/1 on the network device is connected to the internal interface Ten-GigabitEthernet0/0 on the firewall module.

The network device redirects received traffic to the firewall module. The firewall module processes the traffic based on the configured security policy, and redirects permitted traffic to the network device for forwarding.

Configure the network device and firewall module so that you can log in to and restart the firewall module from the network device. Configure the clock synchronization timer as 10 minutes, and configure the monitoring timer as 10 seconds.

71