Cisco Systems OL-31454-01 manual Configuring the Router

Contents

		Identify a Rollover Cable		3-27
		Console Port Connection to a PC				3-28
		Console Port Signaling and Cabling with a DB-9 Adapter									3-29
		Console Port Signaling and Cabling with a DB-25 Adapter									3-30
		Auxiliary Port Connection to a Modem					3-31
		Auxiliary Port Signaling and Cabling Using a DB-25 Adapter										3-31
		Alternative Terminal and Modem Connections							3-32
		Connectors and Cabling for the 8-Port Asynchronous/ Synchronous RS-232 GRWIC 3-33
		Pinouts for the Synchronous/Asynchronous Cables							3-34
		RS-232DB-25 Cable Pinouts				3-34
		RS-232DB-9 Cable Pinouts			3-35
		RS-232RJ-45 Cable Pinouts				3-36
		Configuring the Router 4-1
C H A P T E R 4
		Powering up the Router	4-1
		Checklist for Power Up		4-1
		Power Up Procedure	4-2
		Cisco Setup Command Facility				4-2
		Cisco Configuration Professional Express						4-3
		Cisco Command Line Interface				4-3
		Verifying the Power Supply Side LED Indications							4-3
		Performing the Initial Configuration on the Router						4-3
		Using the Cisco Setup Command Facility					4-4
		Completing the Configuration				4-6
		Using Cisco Configuration Professional Express 4-7
		Using Cisco IOS CLI—Manual Configuration						4-7
		Configuring the Router Hostname					4-8
		Configuring the Enable and Enable Secret Passwords								4-9
		Configuring the Console Idle Privileged EXEC Timeout								4-11
		Configuring Gigabit and FastEthernet Interfaces							4-12
		Specifying a Default Route or Gateway of Last Resort								4-14
		Configuring IP Routing and IP Protocols						4-14
		Default Routes	4-15
		Default Network	4-15
		Gateway of Last Resort 4-15
		Configuring Virtual Terminal Lines for Remote Console Access										4-17
		Configuring the Auxiliary Line				4-19
		Verifying Network Connectivity			4-20
		Saving Your Router Configuration				4-22
					Cisco 2010 Connected Grid Router Hardware Installation Guide
	OL-31454-01												v