HP v30, v45, v40xi manual 5HYLHZWLSVIRUORDGLQJVSHFLILFW\SHVRISDSHU, Paper Tips

HP OfficeJet V Series

5HYLHZ￿WLSV￿IRU￿ORDGLQJ￿VSHFLILF￿W\SHV￿RI￿SDSHU

The following table provides guidelines for loading certain types of paper and film. For best results, adjust the paper settings each time you change paper types and paper sizes. For more information, see “Set the paper type” and “Change the paper size.”.

Paper	Tips
HP papers	• HP Premium Inkjet Paper: Locate the gray arrow on the
		nonprinting side of the paper, and insert paper with the arrow
		side facing up.
	• HP Premium or Premium Plus Photo Paper: Load the glossy
		(print) side down. Always load at least five sheets of regular
		paper in the input tray first, and place the photo paper on top of
		the regular paper.
	•	HP Premium Inkjet Transparency Film: Insert the film so that the
		white transparency strip, with arrows and the HP logo, is on top
		and is going into the tray first.
	•	HP Iron-On T-shirt Transfers: Flatten the transfer sheet
		completely before using it; do not load curled sheets. (To prevent
		curling, keep transfer sheets sealed in the original package until
		just before using.) Manually feed one sheet at a time, with the
		unprinted side facing down (the blue stripe faces up).
	•	HP Greeting Card, Glossy Greeting Card, or Textured Greeting
		Card paper: Insert a small stack of HP Greeting Card Paper with
		the print-side down into the input tray until it stops.
	•	HP Restickable Inkjet Stickers: Place the sheets in the input tray,
		print-side (sticker-side) down.
Legal-size paper	Even though the paper-length adjuster is fully extended, make sure
	that the input tray itself is pushed all the way in.
Labels	•	Always use letter- or A4-size label sheets designed for use with
(only works with		HP inkjet products (like Avery Inkjet Labels), and make sure that
printing)		the labels are not over two years old.
	•	Fan the stack of labels to make sure none of the pages are
		sticking together.
	•	Place a stack of label sheets on top of standard paper in the input
		tray, print-side down. Do not insert labels one sheet at a time.
Postcards	Insert a stack of postcards with the print-side down into the input
(only works with	tray until it stops. Line the postcards up on the right side of the input
printing)	tray, slide the width adjuster up against the left side of the cards, and
	slide the length adjuster in until it stops.

Chapter 4—Load paper or transparency film, or load originals 9