HP 500 manual Replacing Small Parts User-Replaceable

Table 2-7. Replacing Small Parts (User-Replaceable)

Part

Replacement Procedure

Cover, SDRAM

From the bottom of the computer, remove the screw in the SDRAM module cover,

then remove the cover.

Cover, Trackpoint

Pull the old cover off, and press the new cover into place.

Covers, display hinge

Use a flat-blade screwdriver to carefully pry the covers off of the hinges.

Reassembly Notes: Insert the tab on the cover into the slot in the top case, and

press the cover into place. Note that the right display hinge cover has a microphone

icon on its front surface.

Covers, display screw

Insert a small flat-blade screwdriver under the screw cover and pry it loose. To

replace, press the adhesive side of the cover firmly into the recess.

Feet, rubber (on

Insert a small flat-blade screwdriver under the foot and pry it loose. To replace, firmly

bottom of computer

press the adhesive side of the foot into the recess.

and expansion base)

Keyboard

See page 2-10.

Tray, hard disk drive

See page 2-6.

HP Omnibook 500

Removal and Replacement 2-17