HP 500 manual Power APM Menu Default, Boot Menu Default, Exit Menu

Page 96

Power (APM) Menu

 

Default

Intel SpeedStep Mode*

Sets the speed used by a dual-speed processor at boot,

Auto

 

depending on the available power source. A separate Control

 

 

Panel power setting controls speed changes after boot.

 

Power Management Mode

Disables time-outs, selects a pre-set combination of time-outs,

Max. Power

 

or allows customized time-outs.

Savings

Smart CPU Mode

Enables automatic CPU power savings when running on

On

 

battery power. Absence of keyboard, mouse, and hard disk

 

 

activity could slow CPU response.

 

Suspend Time-out

Sets the period of inactivity after which the computer goes

4 minutes

 

from full-power mode to Standby power mode.

 

Hibernate Time-out**

Sets the period of inactivity after which the computer goes

4 hours

 

from full-power mode or Standby mode to Hibernate mode.

 

 

(Skips Standby mode if the Suspend Time-out is disabled.)

 

Hard Disk Time-out

Sets the period of hard disk inactivity after which the internal

2 minutes

 

hard disk (and any hard disk in a plug-in module bay) stops

 

 

spinning.

 

Time-out on AC

Sets whether power management time-outs occur while the

Disabled

 

AC adapter is connected.

 

Lid Switch Mode

Sets the action that occurs if the computer’s lid is closed.

Turn off LCD

Resume On Serial Ring

Sets whether the system resumes if it receives a ring signal.

Disabled

Resume On Time of Day

Sets whether the system resumes at a defined time of day.

Disabled

Resume Time

Sets the 24-hour time when the system resumes if Resume

 

 

On Time of Day is enabled.

 

Auto Suspend on Undock*

Sets whether the computer suspends to Standby mode after

When Lid Closed

 

undocking.

 

Auto Turn-On on Dock*

Sets whether the computer turns on after docking.

Enabled

* Windows 98 and 2000 use these settings.

 

** Windows 98 uses this additional setting.

 

Boot Menu

 

Default

+Hard Disk

Shows the order of boot devices, with “+” indicating a device

1. Hard Disk

+Removable Device

category. Move the entries to change the order. If the

2. Removable

CD-ROM/DVD Drive

computer has more than one device in a category, you can

Device

Internal NIC

select the one scanned. Internal NIC (Network Interface Card)

3. CD-ROM/DVD

 

appears in the list only if a built-in LAN is present—it provides

drive

 

diskless boot from a network server.

4. Internal NIC

Exit Menu

 

 

Save Changes and Exit

Saves Setup changes, then exits and reboots.

 

Discard Changes and Exit

Discards any Setup changes made since last save, then exits

 

 

and reboots. Does not affect password, date, or time changes.

 

Get Default Values

Restores default settings, and remains in Setup. Does not

 

 

affect password, date, or time changes.

 

Load Previous Values

Discards any Setup changes made since last save, and

 

 

remains in Setup. Does not affect password, date, or time

 

 

changes.

 

Save Changes

Saves Setup changes, and remains in Setup. Security

 

 

settings are saved when changed.

 

3-34 Troubleshooting and Diagnostics

HP Omnibook 500

Image 96
Contents HP Omnibook Edition History HP OmnibookContents Figures Tables Introduction Source Address or Number CommentsProduct Information Omnibook 500 Series ModelsProduct Comparisons Features Omnibook Front ViewOmnibook Back View Expansion Base Front View Expansion Base Back View Activating Power Modes OperationTurning the Computer On and Off Battery Status Checking the Status of the ComputerMain Status Lights front of computer Keyboard Status LightsUsing Fn Hot Keys Fn Hot KeysHot Key Effect Resetting the Omnibook Resetting the Computer Resetting an Expansion BaseDocking and Undocking the Computer Docking the ComputerUndocking the Computer Manually Undocking the ComputerConnecting a Floppy Disk Drive 10. Connecting a Floppy Disk DriveSpecifications Omnibook 500 Series SpecificationsWireless LAN Audio System ComputerKeyboard Pointing DeviceSecurity Features Environmental LimitsMajor ICs Computer Omnibook 500 Series Accessories Accessory Description Omnibook Compat 500 6000 900B PC Cards11. Replaceable Component Diagram Internal DesignFunction Components Used Component Roles Bootup Functional StructureRemoval and Replacement Removal Cross-ReferenceDisassembly Flowchart Wireless models onlyRequired Equipment Recommended Screw TorquesScrew Thread Size Torque cm-kgf Torque in-lbf Removing the Main Battery Removal ProcedureRemoving a Plug-In Module Releasing the ModuleHard Disk Drive Replacement Part Numbers Removing the Hard Disk DriveDescription Part Number Exchange Part Number Removing the Hard Disk Tray Reassembly Notes Creating a Utility Partition Removing the Power Button Panel Removing the Power Button Panel Reassembly NotesRemoving the Keyboard Removing the Keyboard ScrewsReassembly Notes Sdram Module Replacement Part Numbers Removing an Sdram ModuleRemoving a System Sdram Module 10. Removing an Sdram Expansion Module Reassembly Note Removing an Expansion Sdram ModuleRemoving a Mini-PCI Card certain models only 12. Routing the Mini-PCI Cables LAN/modem card shown Removing the Switchboard PCA Replacing Small Parts Replacing Small Parts User-ReplaceableRemoving the Display Assembly HP Authorized Service Providers Only14. Removing the Display Reassembly Notes Page Removing the Heatsink/Fan 16. Removing the Heatsink/Fan17. Separating the Heatsink and Fan Reassembly Note Removing the Top Case 18. Removing the Top Case Removing the Motherboard or Bottom Case 19. Removing the Motherboard Reassembly Notes Replacing the Motherboard 20. Removing Motherboard ComponentsReassembly Note Replacing the Bottom Case 21. Removing Bottom Case Components Installation Procedure 22. Replacing the Docking Doors 23. Example of Serial Number LabelRepairing the Bios IC 24. Boot-Block Jumper Removing Omnibook Components Removing Omnibook ComponentsComponent Removal Procedure Additional Steps Heatsink/fan Reassembly Notes Mini-PCI models only. RoutePanel, audio/PCMCIA Panel, mini-PCIPage Troubleshooting and Diagnostics Troubleshooting Basic Troubleshooting StepsTroubleshooting the Problem Checking for Customer AbuseVerifying the Repair Suggestions for Troubleshooting Scope of Diagnostic ToolsTroubleshooting Suggestions StartupHP Omnibook Troubleshooting and Diagnostics Troubleshooting and Diagnostics HP Omnibook Display Use the Recovery CD to DVD Keyboard and pointing stickClick/scroll button Serial/ParallelLAN/Network Wireless Motherboard MiscellaneousTroubleshooting and Diagnostics HP Omnibook Plug-in Modules Troubleshooting and Diagnostics HP Omnibook Diagnostic Tools DiagToolsUpdating e-DiagTools Enter Running e-DiagToolsSerial and Parallel Loopback Connectors E-DiagTools Error Codes Interpreting the ResultsFloppy Disk Tests Smbus Tests 9088h Replace the expansion base Power-On Self-Test Post Terminal-Error Beep CodesBeep Codes Post Description Post Messages Message Description02F7 Fail-Safe Timer NMI Failed Sycard PCCtest Commands Sycard PCCtest 450/460 CardBus Card OptionalPcmcia PC Card 16-bit test CardBus 32-bit test Omnibook 500 PCI1410Installing the DMI Package Using DMI/WMIUninstalling the DMI/WMI Package Desktop and Windows Management Interfaces DMI/WMIBios Setup Utility Running the Bios Setup UtilityBios Setup Menus and Parameters Main Menu DefaultSystem Devices Menu Default Security Menu DefaultPower APM Menu Default Boot Menu DefaultExit Menu Replaceable Parts Omnibook Exploded View Replaceable Parts Description Part Number Exchange User ReplReplaceable Parts HP Omnibook HP Omnibook Replaceable Parts Accessory Replaceable Parts Part Number Reference Part Exchange Description User Number Part Number ReplReplaceable Parts HP Omnibook HP Omnibook Replaceable Parts Clip, wireless cable Password Removal Policy Reference InformationHewlett-Packard Display Quality Statement Omnibook 500 LCD Guidelines 12.1-in TFT, XGA Mechanical ImperfectionsObsolete Repair Parts Obsolete New Description Service Notes/Comments Part NumberObsolete Parts Page Part Number F3476-90024
Related manuals
Manual 64 pages 52.74 Kb Manual 10 pages 14.96 Kb Manual 2 pages 23.31 Kb Manual 32 pages 17.67 Kb

500 specifications

The HP 500 series is a remarkable line of printers designed to meet the diverse needs of both home and professional users. Renowned for their exceptional print quality and advanced technology, these printers have established themselves as a reliable choice for anyone looking to produce high-quality documents and images.

One of the standout features of the HP 500 series is its innovative print technology, specifically the use of HP's Thermal Inkjet technology. This technology ensures vibrant colors and sharp text by precisely controlling the ink dispersion on the page. The result is prints that boast stunning detail and clarity, making them ideal for everything from everyday documents to professional presentations.

Another key characteristic of the HP 500 series is its speedy printing capability. Many models in this line can produce a significant number of pages per minute, thereby enhancing productivity for users who need to handle large printing jobs. Additionally, the series often comes equipped with automatic duplexing, allowing users to print on both sides of the paper, which not only saves time but also reduces paper consumption—making it an eco-friendly choice.

The HP 500 series also emphasizes connectivity and user convenience. Most models offer versatile connectivity options, including USB, Wi-Fi, and Ethernet. This ensures that users can easily integrate their printers into various environments, whether it be a home office, a small business, or a larger corporate setting. Moreover, many models support mobile printing features, enabling users to print directly from their smartphones or tablets through applications like HP Smart.

Furthermore, the HP 500 series is built for durability and reliability. With a robust design and components engineered to withstand high-volume usage, these printers are capable of delivering consistent performance over time. Users can expect low maintenance and easy troubleshooting, which is amplified by HP’s commitment to providing regular firmware updates and customer support.

In terms of design, the HP 500 series printers are typically sleek and compact, making them suitable for a variety of workspaces. Their intuitive control panels and user-friendly interfaces streamline operation, ensuring that even those who are not tech-savvy can easily navigate the features.

In conclusion, the HP 500 series is a well-rounded line of printers that combine cutting-edge technology with practicality. With features such as superior print quality, high-speed performance, versatile connectivity, and user-friendly design, they cater to a wide audience—from students and home users to professionals and businesses. As a testament to HP's innovation and commitment to quality, the HP 500 series remains a popular choice in the competitive printing market.