![](/images/new-backgrounds/1220849/22084997x1.webp)
Removing the Top Case
(HP Authorized Service Providers Only)
Required Equipment
•#0 Phillips screwdriver.
•Small
Removal Procedure
1.Unplug the AC adapter, if present, and remove the battery.
2.Remove these additional assemblies:
•Hard disk drive (page
•Power button panel (page
•Keyboard (page
•Switchboard PCA (page
•Display assembly (page
3.Remove the screws from inside the battery compartment.
4.Remove the six screws from the bottom case.
5.Remove the four screws from the top case.
6.Disconnect the click/scroll button flex cable.
7.Disconnect the
8.Lift the top case off of the computer.
HP Omnibook 500 | Removal and Replacement |