en
Adjusting salt consumption
The dishwasher is designed to allow for adjusting the amount of salt consumed based on the hardness of the water used. This is intended to optimize and customize the level of salt consumption so that it remains at a minimum.
To adjust salt consumption, proceed as follows:
Unscrew the cap from the salt container;
There is a ring on the container with an arrow on it (see figure to the side),
If necessary, rotate the ring in an anticlockwise direction from the
It is recommended that adjustments be made in accordance with the following table:
|
| Water Hardness | ||||
|
|
|
|
|
|
|
|
| Clarke |
|
|
|
|
Level |
|
| ºdH | mmol/l |
| |
| degrees |
|
| |||
1 |
| |||||
2 |
| |||||
3 |
| |||||
4 |
| >71 | >89 | >8,9 | ||
Selector |
| Salt |
|
| Autonomy |
| consumption |
| |||
position |
|
| (cycles/2kg) | ||
| (Grams/cycle) |
| |||
|
|
|
| ||
/ |
| 0 | / | ||
| 20 | 60 | |||
Middle | 40 | 40 | |||
"+" |
| 60 | 25 | ||
9