Combustion Voltage Trim Steps | Lenoxx Electronics Optima 3 FS

CARE AND OPERATION

Combustion Voltage Trim Steps:

1.Push button “twice” for access voltage calibration mode.

2.Identify the current calibration setting indicated by one YELLOW LED bar.

3.Push the “HEAT” control button to adjust setting UP. Each push raises the YELLOW LED bar & increases voltage 5%.

4.Push the “BLOWER” control button to adjust setting DOWN. Each push lowers YELLOW LED bar decreasing voltage 5%.

5.Push the calibration button once to lock in selected results.

Fuel Delivery Rate

The feed rate button manages the fuel delivery rate by controlling the amount of time the auger motor will run as follows:

Optima 2 FS

Feed Rate	AugerMotor	*Lb.’sperhour	♦ Approximate	Burn
Setting	ON/OFFTime	fueldelivery	BTU per hour	Time
	(seconds)		fuel delivery	(hours)
Low =	1 on/5.40 off	1.5 Lb.’s hr.	13,000 BTU/hr	37
Med.=	1 on/3.30 off	2.5 Lb.’s/hr.	21,000 BTU/hr	22
High =	1 on/1.75 off	3.8 Lb.’s/hr.	32,000 BTU/hr	15

Note: Maximum hopper capacity is 55 lb.'s

Optima 3 FS

Feed Rate	AugerMotor	*Lb.’sperhour	♦ Approximate	Burn
Setting	ON / OFFTime	fueldelivery	BTU per hour	Time
	(seconds)		fuel delivery	(hours)
Low =	1 on/4.50 off	1.7 Lb.’s/hr.	14,000 BTU/hr	41
Med.=	1 on/1.90 off	2.6 Lb.’s/hr.	22,000 BTU/hr	27
High =	1 on/1.15 off	4.5 Lb.’s/hr.	38,000 BTU/hr	16

Note: Maximum hopper capacity is 70 lb.'s

Optima 3 INS

Feed Rate	AugerMotor	*Lb.’sperhour	♦ Approximate	Burn
Setting	ON / OFFTime	fueldelivery	BTU per hour	Time
	(seconds)		fuel delivery	(hours)
Low =	1 on/4.50 off	1.7 Lb.’s/hr.	14,000 BTU/hr	30
Med.=	1 on/1.90 off	2.6 Lb.’s/hr.	22,000 BTU/hr	20
High =	1 on/1.15 off	4.5 Lb.’s/hr.	38,000 BTU/hr	11

Note: Maximum hopper capacity is 50 lb.'s

*Feed rates are approximations only. Actual feed rate will vary depending on size, quality and length of fuel used and variations in line voltage.

♦Estimated heat input based on fuel value of 8400 BTU per lb. of fuel.

Your pellet stove can be operated in either manual or automatic mode. The manual mode is used when operating without a thermostat. The auto- matic mode is used when utilizing a wall thermo- stat. When utilizing the thermostat capability the burn time can be extended dramatically depending on thermostat setting. Note: It is normal for some ash to build up on the inner glass surface at the lower burn settings.

Initial Start-Up / Empty Hopper or Feed Tube: During an initial start-up, or in the case where the hop- per has run out of fuel, it will be necessary to prime the auger feed system. The control board is set to deliver fuel for approximately 2 1/2 minutes during start-up, which, with a fully primed auger tube, will provide the appropriate amount of fuel for ignition.

When first starting your pellet stove, it will be nec- essary to prime the auger tube. To prime the auger tube you need to first fill the hopper with pellets, and press the ON button on the control board. Wait approximately 2 1/2 minutes and turn the control board OFF and then back ON again. Wait an addi- tional 2 1/2 minutes (if necessary) and continue this process until fuel begins to fall into the Ultra- Grate. Remember, different brand fuels feed at different rates.

Once fuel starts to enter the UltraGrate, turn the stove OFF and then back ON. The auger tube should now be primed and the stove should deliver enough fuel for proper ignition. It may be necessary to follow these procedures in the event that the hopper runs completely out of fuel.

PAGE 24

Optima 3 FS specifications

Lenoxx Electronics has established itself as a reputable brand in the audio equipment industry, and their Optima 3 FS model is a perfect illustration of their commitment to quality and innovation. Designed for both casual listeners and audiophiles alike, the Optima 3 FS combines advanced technology with user-friendly features, making it a compelling choice for anyone looking to enhance their audio experience.

One of the standout features of the Optima 3 FS is its outstanding sound reproduction capabilities. The speakers are engineered with high-quality drivers that deliver clear and balanced audio across a wide frequency range. Whether you’re listening to music, watching movies, or playing video games, the Optima 3 FS promises an immersive auditory experience that captures the essence of sound.

The model also boasts Bluetooth connectivity, allowing users to pair their smartphones and other devices effortlessly. This wireless feature provides convenience, enabling you to play music from your playlists or streaming services without the hassle of tangled cords. Additionally, the Optima 3 FS is equipped with USB and AUX inputs, ensuring compatibility with various audio devices.

Another significant characteristic of the Optima 3 FS is its compact and stylish design. The sleek finish and modern aesthetics make it an attractive addition to any home décor. Its compact size doesn’t compromise sound quality, making it perfect for smaller spaces where traditional large speakers might not fit.

The user interface is designed to be intuitive, featuring easy-to-use buttons and a clear display that allows for seamless navigation through functions and settings. Furthermore, the Optima 3 FS incorporates a remote control, providing added convenience to adjust volume, skip tracks, or change modes from a distance.

In terms of energy efficiency, the Optima 3 FS is designed to consume less power without sacrificing performance, making it an environmentally friendly choice. This model is also built with durability in mind, featuring robust components that ensure long-lasting use.

In summary, the Lenoxx Electronics Optima 3 FS stands out with its exceptional sound quality, versatile connectivity options, stylish design, and user-friendly features. It caters to a broad audience, from casual listeners to sound enthusiasts, making it a noteworthy addition to the realm of home audio solutions.