Lenoxx Electronics Optima 3 FS operation manual Routine Maintenance, Routine Cleaning

Page 28

ROUTINE MAINTENANCE

*Inspect your stove or insert at minimum frequency stated until you establish a minimum frequency required for your installation (frequency will vary depending upon fuel BTU value / ash content, usage, and misc. installation variables). Unplug and Ensure Stove is Cold Before Performing Any Maintenance Work. Include routine mainte- nance with annual maintenance. The following areas need to be inspected and cleaned as part of annual main- tenance:

ROUTINE CLEANING

Unplug and Ensure Stove is Cold Before Performing Any Maintenance Work.

The following areas need to be inspected and cleaned during Routine Cleaning:

•UltraGrate(burn grate)

•Ash Pan

•Heat Exchange Tubes / Tube Scraper

•Photoeye

•Exhaust Passages and Vent Pipe

•Ash Clean-out Ports

•Gaskets

•Window Wash

•Rear Stove / Insert Compartment

UltraGrate(Burn Grate for All Models)

The UltraGrateshould be inspected periodically to as- sure that the air holes have not become clogged with ash or clinkers. The UltraGratecan easily be cleaned with the grate scraper / ash pan tool, or it can be removed for cleaning. It is very important to monitor the ash build up under the UltraGrate, as excessive amounts of ash will block combustion air from entering the grate, causing pellets to pile-up in the grate. The grate cleaning proce- dure is the same for all models.

UltraGrate

UltraGrate

* (Minimum Frequency of 1 day to 2 weeks)

ASH PAN (Optima 2 FS and Optima 3 FS)

All ash removal and cleaning should be done while stove is cold.

The ash pan will have to be emptied periodically, depend- ing on the amount of fuel consumed. To access follow steps one through four:

1.Open the glass door, then, using the ash pan / grate scraper tool, lift the UltraGrate® out and sweep the top ash into the pan below.

2.Remove the ash pan cover located below the door by pulling forward until magnets release.

Models Optima 2 FS and Optima 3 FS

Ash Pan

Cover

Model Optima 3 INS

Ash Pan

Cover

*(Recommended Frequency of 2 days – 2 weeks)

Optima 3 INS has a handle on the exterior of the ash pan cover for easy access and re- moval.

PAGE 28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Installation and Operation Manual Freestanding Insert Pellet Fired StovesImportant Warnings Table of Contents Planning Your Installation Installation / Maintenance StandardsSelecting a Location Smoke DetectorsFloor Protection Optima 2 FS Top View of Model Optima 2 FSFloor Protection / Hearth Extension Using Minimum Clearances to Combustibles ClearancesOptima 3 FS Fireplace Warning Label Provided in accessory package Masonry and Factory Built FireplacesMinimum Fireplace Firebox Size Top ViewModels Optima 2 FS and Optima 3 FS Installation Check List InstallationRemoving Appliance from Pallet Installation Damper Locations Damper AdjustmentDamper Air Control Handle Freestanding Units Thermostat Installation Model Optima 3 FSModel Optima 3 INS Model Optima 2 FSInstalltion Venting RequirementsSite Built Residential Home Chimney Height Requirements Vent TerminationManufactured Mobile Home Chimney Height Requirements Determining Size of Pipe to Install Installation ChartSample Installation Chart Pipe Selection ChartStandard Horizontal Vent Installation Installing Your Freestanding Pellet StoveGasket Optima 3 FS Corner Through the Wall Optima 2 FS Corner Through the WallExterior Vertical Vent Preferred Installation Vertical Vent Through RoofVertical Vent Into a Masonry Flue Existing Class a Chimney USA & Canada Direct Connection / Positive Flue Connection Direct Connection Not allowed in CanadaInstalling Optima 3 INS Vent Termination When Liner is UsedCare and Operation Control Board OperationStart-up Sequence of Events Combustion Voltage Trim Steps Fuel Delivery RateLighting Procedure Without Igniter Manual OperationAutomatic Operation Turning OFF Your Pellet StoveDamper Adjustment Guideline Automatic Safety FeaturesPower Outage Damper Operation All modelsFuel UltraGrateRoutine Cleaning Routine MaintenanceUltraGrate Burn Grate for All Models Use tool to grab scraper rod Removing Photoeye Filter for Cleaning Photoeye Access Inside HopperRemove Filter and Wipe Clean Clean Photoeye Lens Clean-Out TeeASH CLEAN-OUT Ports Door Rope Gasket All Models Door Rope GasketChecking Door Seal Creosote Removal All Models Window WashRear Stove Compartment All Models Small Area Paint TOUCH-UPMotor Lubrication Back View Side ViewOn size and type of fuel used. Estimated heat input Fuel delivery and burn times will vary dependingBased on fuel value of 8400 BTU per lb 23 5/8 TOP ViewComponent Definitions Wiring Diagram Troubleshooting Qualified Technicians Only Troubleshooting Qualified Technicians Only Troubleshooting Qualified Technicians Only Replacement Parts List Electrical Parts Item # Description Stove ModelAuger System Components Item # Description Stove Model Firebox Parts Item # Description Stove ModelMisc Item # Description Stove Model Replacement Parts Diagrams Replacement Parts Diagrams Replacement Parts Diagrams Replacement Parts Diagrams Optional Accessories Diagrams Optional Accessories Item # Model Description Stove ModelInstallation Tips Simple Operating Instructions Label SAFETY/LISTING Label Model Optima 2 FS SAFETY/LISTING Label Model Optima 3 FS and Optima 3 INS Service and Maintenance LOG Ownership RecordsWest Taft Avenue Orange, CA

Optima 3 FS specifications

Lenoxx Electronics has established itself as a reputable brand in the audio equipment industry, and their Optima 3 FS model is a perfect illustration of their commitment to quality and innovation. Designed for both casual listeners and audiophiles alike, the Optima 3 FS combines advanced technology with user-friendly features, making it a compelling choice for anyone looking to enhance their audio experience.

One of the standout features of the Optima 3 FS is its outstanding sound reproduction capabilities. The speakers are engineered with high-quality drivers that deliver clear and balanced audio across a wide frequency range. Whether you’re listening to music, watching movies, or playing video games, the Optima 3 FS promises an immersive auditory experience that captures the essence of sound.

The model also boasts Bluetooth connectivity, allowing users to pair their smartphones and other devices effortlessly. This wireless feature provides convenience, enabling you to play music from your playlists or streaming services without the hassle of tangled cords. Additionally, the Optima 3 FS is equipped with USB and AUX inputs, ensuring compatibility with various audio devices.

Another significant characteristic of the Optima 3 FS is its compact and stylish design. The sleek finish and modern aesthetics make it an attractive addition to any home décor. Its compact size doesn’t compromise sound quality, making it perfect for smaller spaces where traditional large speakers might not fit.

The user interface is designed to be intuitive, featuring easy-to-use buttons and a clear display that allows for seamless navigation through functions and settings. Furthermore, the Optima 3 FS incorporates a remote control, providing added convenience to adjust volume, skip tracks, or change modes from a distance.

In terms of energy efficiency, the Optima 3 FS is designed to consume less power without sacrificing performance, making it an environmentally friendly choice. This model is also built with durability in mind, featuring robust components that ensure long-lasting use.

In summary, the Lenoxx Electronics Optima 3 FS stands out with its exceptional sound quality, versatile connectivity options, stylish design, and user-friendly features. It caters to a broad audience, from casual listeners to sound enthusiasts, making it a noteworthy addition to the realm of home audio solutions.
Top Page Image Contents