Lenoxx Electronics Optima 3 FS operation manual Table of Contents

Page 3

TABLE OF CONTENTS

Important Warnings

2

Testing / Listing, EPA, Using this Manual

3

Planning Your Installation

4-9

Manufactured (Mobile) Home Installation

9

Installation

10-21

Care and Operation

22-27

Routine Maintenance

28-33

Specifications

34-36

Definitions

37

Wiring Diagram

38

Troubleshooting

39-41

Replacement Parts List / Diagrams

42-47

Optional Accessories

48

Installation Tips

49

Simple Operating Instructions

50

Safety / Listing Label and EPA Label

51-52

Ownership Records

53

LISTING / TESTING

Listing: The listing laboratory is ITS (Intertek Testing Ser- vices) and the listing mark is Warnock Hersey.

Testing: In accordance with the specifications and proce- dures listed in UL 1482 & ASTM E1509 for solid fuel room heater, this appliance has been independently tested to UL, ULC and CSA standards, report # 6658 for AdvantageOptima 2 and report #476-1244 for AdvantageOptima 3. UL 1482 states requirements for installations as a free- standing room heater, or hearth insert for masonry or listed factory built (zero clearance) fireplaces. The safety-listing label is located on an inside hopper surface of the pellet stove. Please read this safety label carefully. It contains important information about installation and operation of this appliance. This appliance is tested and listed for resi- dential installation according to current national and local building codes as:

•A Freestanding Room Heater

•A Manufactured (mobile) Home Heater

EPA (Environmental Protection Agency)

Status: EPA Exempt - Pellet appliances that are de- signed with the combustion air supply exceeding the 35 to 1 (by weight) ratio are exempt from EPA regulations and are “non-affected facilities.”

PRODUCT IS SUBJECT TO CHANGE WITHOUT NO- TICE.

CONGRATULATIONS ON THE PURCHASE OF YOUR NEW PELLET STOVE MANUFACTURED BY LENNOX HEARTH PRODUCTS.

When you purchased your new pellet stove, you joined the ranks of thousands of concerned indi- viduals whose answer to their home heating needs reflects their concern for aesthetics, efficiency and our environment. We extend our continued support to help you achieve the maximum benefit and enjoy- ment available from your new pellet stove.

It is our goal at Lennox Hearth Products to provide you, our valued customer, with an appliance that will ensure you years of trouble free warmth and pleas- ure.

Thank you for selecting a Lennox Hearth Products stove as the answer to your home heating needs.

Sincerely,

All of us at Lennox Hearth Products

PACKAGING LIST

The assembled pellet stove model Optima 2 FS, Optima 3 FS and Optima 3 INS are packaged with an accessory package, which contains the following:

One - Installation and operation instructions manual. One - Warranty.

One - Power cord.

One- Control board – Optima 3 INS only.

One - Screw, #8 x ½” tek (for mounting control board)

–Optima 3 INS only.

One - Grate scraper. One - Video

One - Lower trim One - Wall thermostat.

One - Roll of thermostat wire.

Two- Leveling bolts, ¼-20 x 3” – Optima 3 INS only. One - Door Handle (removable)

One - Fireplace Warning Label (see page 8)

Surround Kit (For Optima 3 INS Only)

(Purchased separately, see page 48) kit is packaged with: One - Top surround panel.

One - Left surround panel.

One - Right surround panel with door. One - Left side trim.

One - Right side trim. One - Top trim.

Two - Corner keys (“L” shaped surround trim brackets).

USING THIS MANUAL

Please read and carefully follow all of the instructions found in this manual. Please pay special attention to the safety instructions provided in this manual. The home- owner’s Care and Operation Instructions included here will assure you have many years of dependable and en- joyable service from your appliance.

PAGE 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Freestanding Insert Pellet Fired Stoves Installation and Operation ManualImportant Warnings Table of Contents Smoke Detectors Planning Your InstallationInstallation / Maintenance Standards Selecting a LocationTop View of Model Optima 2 FS Floor Protection Optima 2 FSFloor Protection / Hearth Extension Using Clearances Minimum Clearances to CombustiblesOptima 3 FS Top View Fireplace Warning Label Provided in accessory packageMasonry and Factory Built Fireplaces Minimum Fireplace Firebox SizeModels Optima 2 FS and Optima 3 FS Installation Installation Check ListRemoving Appliance from Pallet Installation Damper Adjustment Damper LocationsDamper Air Control Handle Freestanding Units Model Optima 2 FS Thermostat InstallationModel Optima 3 FS Model Optima 3 INSVenting Requirements InstalltionVent Termination Site Built Residential Home Chimney Height RequirementsManufactured Mobile Home Chimney Height Requirements Pipe Selection Chart Determining Size of Pipe to InstallInstallation Chart Sample Installation ChartInstalling Your Freestanding Pellet Stove Standard Horizontal Vent InstallationGasket Optima 2 FS Corner Through the Wall Optima 3 FS Corner Through the WallPreferred Installation Vertical Vent Through Roof Exterior Vertical VentVertical Vent Into a Masonry Flue Existing Class a Chimney Direct Connection Not allowed in Canada USA & Canada Direct Connection / Positive Flue ConnectionVent Termination When Liner is Used Installing Optima 3 INSControl Board Operation Care and OperationStart-up Sequence of Events Fuel Delivery Rate Combustion Voltage Trim StepsTurning OFF Your Pellet Stove Lighting Procedure Without IgniterManual Operation Automatic OperationDamper Operation All models Damper Adjustment GuidelineAutomatic Safety Features Power OutageUltraGrate FuelRoutine Maintenance Routine CleaningUltraGrate Burn Grate for All Models Use tool to grab scraper rod Photoeye Access Inside Hopper Removing Photoeye Filter for CleaningClean Photoeye Lens Clean-Out Tee Remove Filter and Wipe CleanASH CLEAN-OUT Ports Window Wash Door Rope Gasket All ModelsDoor Rope Gasket Checking Door Seal Creosote Removal All ModelsSmall Area Paint TOUCH-UP Rear Stove Compartment All ModelsMotor Lubrication Side View Back ViewFuel delivery and burn times will vary depending On size and type of fuel used. Estimated heat inputBased on fuel value of 8400 BTU per lb TOP View 23 5/8Component Definitions Wiring Diagram Troubleshooting Qualified Technicians Only Troubleshooting Qualified Technicians Only Troubleshooting Qualified Technicians Only Electrical Parts Item # Description Stove Model Replacement Parts ListFirebox Parts Item # Description Stove Model Auger System Components Item # Description Stove ModelMisc Item # Description Stove Model Replacement Parts Diagrams Replacement Parts Diagrams Replacement Parts Diagrams Replacement Parts Diagrams Optional Accessories Item # Model Description Stove Model Optional Accessories DiagramsInstallation Tips Simple Operating Instructions Label SAFETY/LISTING Label Model Optima 2 FS SAFETY/LISTING Label Model Optima 3 FS and Optima 3 INS Ownership Records Service and Maintenance LOGWest Taft Avenue Orange, CA

Optima 3 FS specifications

Lenoxx Electronics has established itself as a reputable brand in the audio equipment industry, and their Optima 3 FS model is a perfect illustration of their commitment to quality and innovation. Designed for both casual listeners and audiophiles alike, the Optima 3 FS combines advanced technology with user-friendly features, making it a compelling choice for anyone looking to enhance their audio experience.

One of the standout features of the Optima 3 FS is its outstanding sound reproduction capabilities. The speakers are engineered with high-quality drivers that deliver clear and balanced audio across a wide frequency range. Whether you’re listening to music, watching movies, or playing video games, the Optima 3 FS promises an immersive auditory experience that captures the essence of sound.

The model also boasts Bluetooth connectivity, allowing users to pair their smartphones and other devices effortlessly. This wireless feature provides convenience, enabling you to play music from your playlists or streaming services without the hassle of tangled cords. Additionally, the Optima 3 FS is equipped with USB and AUX inputs, ensuring compatibility with various audio devices.

Another significant characteristic of the Optima 3 FS is its compact and stylish design. The sleek finish and modern aesthetics make it an attractive addition to any home décor. Its compact size doesn’t compromise sound quality, making it perfect for smaller spaces where traditional large speakers might not fit.

The user interface is designed to be intuitive, featuring easy-to-use buttons and a clear display that allows for seamless navigation through functions and settings. Furthermore, the Optima 3 FS incorporates a remote control, providing added convenience to adjust volume, skip tracks, or change modes from a distance.

In terms of energy efficiency, the Optima 3 FS is designed to consume less power without sacrificing performance, making it an environmentally friendly choice. This model is also built with durability in mind, featuring robust components that ensure long-lasting use.

In summary, the Lenoxx Electronics Optima 3 FS stands out with its exceptional sound quality, versatile connectivity options, stylish design, and user-friendly features. It caters to a broad audience, from casual listeners to sound enthusiasts, making it a noteworthy addition to the realm of home audio solutions.
Top Page Image Contents