Station Preset (APM: Auto Preset Memory, P·SET: Preset)
Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively.
Preset stations can be simply called up by pressing [}] (P·SET) or [{] (P·SET).
Notes:
¡Direct selection can be executed with [1] to [6] but- tons on remote control.
¡You can switch between 6 and 18 for FM presetting stations. (EACH BAND/ALL BAND)
¡Preset stations are changeable. (Preset Swap)
Auto Preset Memory (APM)
Stations with good receiving conditions automatically preset.
1 Select a band. 
2 Hold down [BAND] (APM) for 2 sec. or
more.
The preset stations under best receiving conditions are received for 5 sec. each after presetting the sta- tions (SCAN). To stop scanning, press [}] or [{].
Note: New stations overwrite existing saved stations.
Manual station preset
1 Tune in to a station.
2 Hold down [}] or [{] for 2 sec. or more.
3 Select a preset number by pressing [}] or [{].
Note: If [BAND] is pressed while receiving an FM station, FM broadcasting is changeable among FM 1 to FM 3.
4 Hold down [BAND] (SET) for 2 sec. or more to determine the selection.
Notes:
¡In step 2, a station can be registered by holding down the numeric button [1] to [6] for 2 sec. or more.
¡To stop presetting stations, press [DISP] (Display).
¡The operation above allows users to replace the cur- rent station with the station preset in the selected number while selecting a preset station.
English
Radio Menu Display
1 Press [MENU] to display the menu dis- play.
For using the remote control, hold down
[SEL](MENU) for 2
sec. or more.
2 Press [}] or [{] to select a mode to be adjusted.
3 Press [BAND]
(SET) to adjust.
4 Press [MENU] to confirm the adjust- ment.
For using the remote control, hold down [SEL] (MENU) for 2 sec. or more.
PRESET
Preset range for FM bands
: Individual setting for
: Setting of