Optima Company 600 - 1700 manual Tripped high pressure switch, Sensor failure / short circuit

Page 30

What to do if a fault occurs

Tripped high pressure switch

Possible cause 1: Air in the heating system.

Action:

1.

Select Acknowledge.

 

2.

Check whether there is air in the radiators.

 

3.

Fill the heating system and vent if necessary.

Possible cause 2: Particle filter is clogged.

Action:

1.

Select Acknowledge.

 

2.

Check the filter.

 

3.

Clean the filter if necessary, see Maintenance.

Possible cause 3: Not enough flow over the heat pump.

Action:

1.

Select Acknowledge.

 

2.

Check that the heat carrier pump has not stopped.

 

 

If an existing electric/oil-fired boiler is connected,

 

 

the heat carrier pump is on one of the pipes.

 

3.

Check that all the valves are open. In heating

 

 

systems with thermostat valves these should be

 

 

fully open and in underfloor heating systems at

 

 

least half of the coils should be fully open.

 

4.

Possibly increase the pump speed.

 

5.

Contact your dealer.

Heat carrier pump (290 A/W)

Sensor failure / short circuit

All sensors connected to the heating installation can give an alarm in the event of a fault. In the example to the right it is sensor T3, hot water, which has given an alarm. All sensors give alarms in the same way.

Possible cause 1: Temporary error.

Action:1. Wait and see.

Possible cause 2: Defective sensor or incorrect connection.

Action:

1. Contact your dealer.

30

Note

Increase the speed of the heat car- rier pump:

Use a screwdriver or a coin to increase the speed of the heat carrier pump. Turn one step anti-clockwise.

Page 29 Page 31
Image 30
Page 29 Page 31
Contents IVT Optima Page Page Innehåll For the user Important informationHow a heat pump works Technology in and around the heat pumpHeat pump collects heat from the outdoor air How a heat pump works Component parts of the heat pump IVT OptimaComponent parts of the heat pump Additional heat gives more output Control unit RegoAutomatic defrosting Hot water is given priority over heating waterHeat pump with electric boiler 290 A/W Control unit’s operating modesHeat pump with electric cassette OptimaControl with an outdoor sensor Control with an outdoor sensor and a room sensorControl panel Status lamp290 A/W Control cabinet Symbol overview Power switch ON/OFFHow to use the control panel Menu dialMenu levels MenuMenu overview Set the heating Setting the heating, room sensor not installedSetting the heating, room sensor installed Extra hot waterOutdoor sensor T2 TemperaturesFlow sensor T1 Hot water sensor T3Advanced menu OverviewAdjusting a single value Flow temperatureOutdoor temperature Heat curveSet the heat curve Hysteresis Set the desired room temperatureTime limited settings Time controlHeating season Heating, maximum operating time at hot water requirementHoliday Extra hot water Hot water settingsRecurring increase in the hot water temperature Hot water peakTimers Setting the clockReturn to factory settings Alarm logAccess level Deactivate alarm buzzerRemove dirt and leaves MaintenanceUnscrew the protective covers Protective coversParticle filter EvaporatorSnow and ice Dimmed menu display What to do if a fault occursExample of an alarm Emergency operationTripped low pressure switch All alarms and warning windowsList of all alarms List of all warning windowsTripped high pressure switch Sensor failure / short circuitFaulty function in 4-way valve T6 High hot gas temperatureT8 High flow temperature Possible cause 4 Compressor error Low temperature in condenserPossible cause 3 Faulty heat carrier pump Tripped motor cut-out compressorPossible cause 2 The hot water temperature is set too high High temperature difference heat transfer fluidPossible cause 4 Faulty fan motor Tripped motor cut-out fan Optima1000/1300Action Open the valves Factory settings Technical informationTechnical information Sound levelsTemperature ºC Sensor table

600 - 1700 specifications

The Optima Company 600 - 1700 is a sophisticated product line designed to meet the demanding needs of modern industrial applications. Recognized for its efficiency and versatility, the Optima 600 - 1700 series has gained traction across various sectors, including manufacturing, chemical processing, and energy production.

At its core, the Optima 600 - 1700 combines cutting-edge technology with user-friendly features. One of the standout characteristics of this series is its advanced control system. The intuitive interface allows operators to easily configure settings, monitor performance, and receive real-time updates on system conditions. This feature not only enhances user experience but also maximizes operational efficiency by minimizing downtime.

A notable aspect of the Optima series is its modular design, which offers a high degree of customization. Businesses can choose from various configurations and components that best suit their specific operational needs. This adaptability means that the Optima 600 - 1700 can be scaled up or down, making it ideal for both small-scale operations and large production facilities.

The durability of the Optima 600 - 1700 is another key feature. Designed to withstand harsh industrial environments, the materials used in its construction ensure longevity and reliability. Manufacturers have prioritized robust engineering, resulting in a product that requires minimal maintenance while consistently delivering optimal performance.

Energy efficiency is a critical focus for the Optima Company, and the 600 - 1700 series exemplifies this commitment. The equipment is designed to minimize energy consumption without sacrificing functionality. This not only reduces operational costs for businesses but also aligns with global sustainability goals.

Further enhancing its capabilities, the Optima 600 - 1700 series incorporates smart technology features. With integrated IoT functionalities, clients can benefit from predictive maintenance, enabling them to anticipate potential issues before they escalate. This proactive approach to maintenance leads to increased uptime and can result in substantial cost savings over the lifespan of the equipment.

In summary, the Optima Company 600 - 1700 series stands out as a remarkable solution in the industrial equipment market. With its combination of advanced technology, customization options, durability, energy efficiency, and smart features, it meets the evolving demands of businesses while ensuring reliability and performance. Manufacturers and industrial operators looking for an advanced yet practical solution would do well to consider the Optima 600 - 1700 series as a key asset in their operational arsenal.
Top Page Image Contents