Samsung AS18A5(A6)RC, US12AA(AB)MC, US12A5(A6)MC, US18A5(A6)RC, US18A9(A0)RCD Cooling Your Room

Page 11

Cooling Your Room

ENGLISH

You must select the Cool mode if you wish to adjust the:

Cooling temperature

Fan speed when cooling

1 If necessary, press the (On/Off) button.

Result:

The 5 Way indicator on the indoor unit lights up.

 

The air conditioner starts up in the mode selected

 

when the unit was last used.

 

The indoor unit beeps.

IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

Plugged in

Stopped

lt will start up normally after three minutes.

2 If the is not displayed at the top of the remote control,

press the MODE button on the remote control one or more times until it appears.

Result:

The indoor unit beeps each time you press the MODE button.

The air conditioner runs in COOL mode.

Note You can change modes at any time.

3To adjust the temperature, press the TEMPERATURE buttons one or more times until the required temperature is displayed.

Possible temperatures are between 65°F(18°C) and 86°F(30°C) inclusive.

Result: Each time you press the TEMPERATURE buttons:

-The temperature is adjusted by 1°F(1°C)

-The indoor unit beeps

The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature; the fan will, however, operate.

4Select the fan speed by pressing the FAN button one or more times until the required setting is displayed:

Automatic (rotated : )

Low

Medium

High

Result: Each time you press the FAN button, the indoor unit beeps.

5To control the direction of the air flow, refer to page 15.

E-11

Image 11
Contents Manuel D’UTILISATION & Manuel D’INSTALLATION Safety Precautions Contents Indoor Unit View of the UnitOutdoor Unit Remote Control Buttons and Display Getting Started Installing the Remote Controller Holder Inserting the Remote Control BatteriesTo obtain an Using with the indoor unitSelecting with the Remote Control Way FunctionSelecting the Automatic Operating Mode Cooling Your Room Changing the Room Temperature Quickly Removing Excess Humidity Airing Your Room Adjusting the Air Flow Direction Horizontally Adjusting the Air Flow Direction VerticallyTo Cancel the On Timer Setting the On TimerTo Cancel the Off Timer Setting the Off TimerTo Cancel the Sleep Timer Setting the Sleep TimerTopic Recommendation Operating RecommendationsIf the air conditioner is used at... Then Temperature and Humidity RangesMode Outdoor Temperature Indoor Temperature Indoor Humidity Model AS07A5A6MA/AS09A5A6MA/AS12A5A6MC /AS12AAABMC Cleaning Your Air ConditionerAUTO, Cool Solving Common ProblemsInstalling a Filter Option Model Technical SpecificationsAS24A1A2RC AS18A5A6RCInstallation Manual Purging the Unit Indoor Unit Deciding on Where to Install the Air Conditioner30mm1inch or more Accessories in the Outdoor Unit Case Air Conditioner and AccessoriesAccessories in the Indoor Unit Case Wall Window frame Fixing the Installation PlateThen follow Steps Purging the Unit Connecting the Assembly CableAS18A9A0RCD / AS24A1A2RC To install the drain hose, proceed as follows Installing and Connecting the Indoor Unit Drain HoseTorque Installing and Connecting the Indoor Unit Assembly PipingPipe Depth a Cutting/Extending the Piping18/24 Connecting the Cables to the Outdoor Unit07/09 AS12A5A6MCElectrical Work Auxiliary Circuit Breaker50 19 Checking Correct EarthingModel Fixing the Unit in PositionIf you have used Then Connecting Up and Purging the CircuitPerforming Leak Tests To check for gas leaks on Then, using a leak detector CheckPlacing the Indoor Unit in Position Checking and Testing Operations Explaining Operations to the Owner Electronics