Samsung AS09A5(A6)MA, US12AA(AB)MC, US12A5(A6)MC, US18A5(A6)RC Solving Common Problems, AUTO, Cool

Page 22

Solving Common Problems

Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call.

Problem

Explanation/Solution

 

 

The air conditioner does not operate at all

◆Check that the breaker used for the air conditioner is switched on.

◆Check that the 5 Way indicator on the indoor unit is on;

if necessary press the (On/Off) button on the remote control.

◆Check whether the TIMER indicator on the indoor unit is switched on. If so:

-Wait until the switch-on time is reached and the air conditioner starts up automatically

-Cancel the timer (see pages 16 and 17 for further details)

The air conditioner does not operate with the remote control

◆Check that there are no obstacles between you and the indoor unit.

◆Check the remote control batteries.

◆Check that you are close enough to the indoor unit (seven metres/yards/23ft. or less).

No beep is heard when you press the (On/Off) on the remote control

◆Check that you are pointing the remote control at the remote control sensor in the right of the indoor unit.

◆Replace the remote control batteries if necessary.

The air conditioner does not cool

◆ Check that the correct operating mode has been selected

 

(AUTO, COOL).

 

◆ The room temperature may be too low or too high.

 

◆ Dust may be blocking the air filter guard; refer to page 21 for cleaning

 

instructions.

 

 

◆ Check that there is no obstacle in front of the outdoor unit.

 

 

The fan speed does not change

◆ Check that the operating mode is set to COOL or FAN ;

when you press the FAN button

in the AUTO mode, the fan speed changes automatically and in the

 

DRY mode, it is set to AUTO.

 

 

The air flow direction does not

◆ Check that the air conditioner has been switched on; if necessary,

change when you press the

press the

(On/Off) button on the remote control.

SWING button

 

 

 

 

The timer is not correctly triggered

◆ Check that the timer has been programmed correctly; see pages 16

 

and 17.

 

 

 

 

Odours are permeated in the room

◆ Air the room.

 

during air conditioning

 

 

 

 

 

E-22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Manuel D’UTILISATION & Manuel D’INSTALLATION Safety Precautions Contents View of the Unit Indoor UnitOutdoor Unit Remote Control Buttons and Display Getting Started Inserting the Remote Control Batteries Installing the Remote Controller HolderWay Function Using with the indoor unitSelecting with the Remote Control To obtain anSelecting the Automatic Operating Mode Cooling Your Room Changing the Room Temperature Quickly Removing Excess Humidity Airing Your Room Adjusting the Air Flow Direction Vertically Adjusting the Air Flow Direction HorizontallySetting the On Timer To Cancel the On TimerSetting the Off Timer To Cancel the Off TimerSetting the Sleep Timer To Cancel the Sleep TimerOperating Recommendations Topic RecommendationMode Outdoor Temperature Indoor Temperature Indoor Humidity Temperature and Humidity RangesIf the air conditioner is used at... Then Cleaning Your Air Conditioner Model AS07A5A6MA/AS09A5A6MA/AS12A5A6MC /AS12AAABMCSolving Common Problems AUTO, CoolInstalling a Filter Option Technical Specifications ModelAS18A5A6RC AS24A1A2RCInstallation Manual Purging the Unit Deciding on Where to Install the Air Conditioner Indoor Unit30mm1inch or more Accessories in the Indoor Unit Case Air Conditioner and AccessoriesAccessories in the Outdoor Unit Case Then follow Steps Fixing the Installation PlateWall Window frame Connecting the Assembly Cable Purging the UnitAS18A9A0RCD / AS24A1A2RC Installing and Connecting the Indoor Unit Drain Hose To install the drain hose, proceed as followsPipe Installing and Connecting the Indoor Unit Assembly PipingTorque Cutting/Extending the Piping Depth aAS12A5A6MC Connecting the Cables to the Outdoor Unit07/09 18/24Auxiliary Circuit Breaker Electrical WorkChecking Correct Earthing 50 19Fixing the Unit in Position ModelConnecting Up and Purging the Circuit If you have used ThenTo check for gas leaks on Then, using a leak detector Check Performing Leak TestsPlacing the Indoor Unit in Position Checking and Testing Operations Explaining Operations to the Owner Electronics
Top Page Image Contents