Samsung US18A5(A6)RC, US12AA(AB)MC, US12A5(A6)MC, US18A9(A0)RCD Checking and Testing Operations

Page 44

COMPLETING THE INSTALLATION

Checking and Testing Operations

To complete the installation, perform the following checks and tests to ensure that the air conditioner is operating correctly.

1Review all the following elements in the installation:

Installation site strength

Piping connection tightness to detect any gas leakages

Connection wiring

Heat-resistant insulation of the piping

Drainage

Earthing wire connection

Correct operations (follow the steps below)

2Press the On/Off button.

Result: The indicator lights on the indoor unit flash at half-second intervals.

While the indoor unit opens, the indoor unit fan runs to start.

3Press the button.

Result: The outdoor unit operates in cooling mode as following the room temperature.

4

Air flow direction

Press the

 

button and check that the air

 

 

flow blades work properly.

 

 

 

 

 

E-44

Image 44
Contents Manuel D’UTILISATION & Manuel D’INSTALLATION Safety Precautions Contents View of the Unit Indoor UnitOutdoor Unit Remote Control Buttons and Display Getting Started Inserting the Remote Control Batteries Installing the Remote Controller HolderUsing with the indoor unit Selecting with the Remote ControlWay Function To obtain anSelecting the Automatic Operating Mode Cooling Your Room Changing the Room Temperature Quickly Removing Excess Humidity Airing Your Room Adjusting the Air Flow Direction Vertically Adjusting the Air Flow Direction HorizontallySetting the On Timer To Cancel the On TimerSetting the Off Timer To Cancel the Off TimerSetting the Sleep Timer To Cancel the Sleep TimerOperating Recommendations Topic RecommendationIf the air conditioner is used at... Then Temperature and Humidity RangesMode Outdoor Temperature Indoor Temperature Indoor Humidity Cleaning Your Air Conditioner Model AS07A5A6MA/AS09A5A6MA/AS12A5A6MC /AS12AAABMCSolving Common Problems AUTO, CoolInstalling a Filter Option Technical Specifications ModelAS18A5A6RC AS24A1A2RCInstallation Manual Purging the Unit Deciding on Where to Install the Air Conditioner Indoor Unit30mm1inch or more Accessories in the Outdoor Unit Case Air Conditioner and AccessoriesAccessories in the Indoor Unit Case Wall Window frame Fixing the Installation PlateThen follow Steps Connecting the Assembly Cable Purging the UnitAS18A9A0RCD / AS24A1A2RC Installing and Connecting the Indoor Unit Drain Hose To install the drain hose, proceed as followsTorque Installing and Connecting the Indoor Unit Assembly PipingPipe Cutting/Extending the Piping Depth aConnecting the Cables to the Outdoor Unit 07/09AS12A5A6MC 18/24Auxiliary Circuit Breaker Electrical WorkChecking Correct Earthing 50 19Fixing the Unit in Position ModelConnecting Up and Purging the Circuit If you have used ThenTo check for gas leaks on Then, using a leak detector Check Performing Leak TestsPlacing the Indoor Unit in Position Checking and Testing Operations Explaining Operations to the Owner Electronics