Heatiator ECO-ADV-WS22 warranty D. Door Handle Assembly

D. Door Handle Assembly

1.Install washer on door handle shaft.

2.Slide door handle through door.

3.Install second washer(s) as shown in Figure 23.1.

4.Install key in groove.

5.Align groove in latch cam with key; slide latch cam over shaft

6.Install locknut but do not overtighten, the handle needs to move smoothly.

7.Install spring handle turning in a counter-clockwise mo- tion to desired location on door handle rod.

CAUTION! Do not overtighten lock nut. The door handle needs to move smoothly.

	Door Cross Section
Latch Cam	(example)
Locknut
	Spring
	Handle
	Door Handle
	Spacing
	Washers
	Square Key

Figure 23.1

Heatilator • ECO-ADV-WS22 • 7057-128C • August 13, 2010 23