11 
DISASSEMBLY INSTRUCTIONS
<"Terminal with locking mechanism" Detaching points>
The terminal which has the locking mechanism can be detached as shown below.
There are two types ( Refer to (1) and (2)) of the terminal with locking mechanism.
The terminal without locking mechanism can be detached by pulling it out.
Check the shape of the terminal before detaching.
| (1) Slide the sleeve and check if there is a locking lever or not. | (2) The terminal with this connector has the | |||||
| Sleeve |
|
| locking mechanism. |
| ||
|
|
|
|
|
|
| |
|
| Slide the sleeve. |
|
|
| Hold the sleeve, and | |
|
| Pull the terminal while |
|
| pull out the terminal | ||
| Locking lever | pushing the locking |
|
|
| slowly. |
|
| lever. |
|
|
|
|
| |
|
|
|
|
| Connector |
| |
|
|
|
| ||||
| NOTE : Turn OFF power supply before disassembling. | ||||||
|
|
|
|
|
| ||
| OPERATING PROCEDURE |
|
|
| PHOTOS | ||
1. Removing the cabinet |
| Photo 1 |
|
|
| ||
(1) | Remove the screw fixing the service panel. (See |
|
|
|
|
| |
| Photo 1.) |
|
| Screws |
|
|
|
(2) | Pull down the service panel and remove it. (See Photo |
| Screw of the | Screws of | |||
(3) | 1.) |
|
| of the top | cabinet | ||
Remove the screws fixing the conduit cover. (See |
| panel |
|
| the top panel | ||
| Photo 2.) |
|
|
|
|
| Back |
(4) | Remove the conduit cover. (See Photo 2.) |
|
|
|
| ||
|
|
|
| panel | |||
(5) | Disconnect the power supply wire and indoor/outdoor |
|
|
|
| ||
|
|
|
|
| |||
| connecting wire. |
|
|
|
|
|
|
(6) Remove the screws fixing the top panel. (See Photo 1.) |
|
|
|
| Screw of | ||
(7) | Remove the top panel. (See Photo 1.) |
|
|
|
|
| the service |
(8) | Remove the screws fixing the cabinet. |
|
|
|
|
| panel |
(9)Remove the cabinet.
(10)Remove the screws fixing the back panel.
(11)Remove the back panel.
Photo 2
Hooks
Screw of the conduit cover
Screws of | Service |
the cabinet | panel |
| Conduit plate |
Conduit cover |
32