INSTALLATION INSTRUCTIONS
INSTALLATION
Medium Ceramica
3.9Place the flame baffle onto the shelf at the rear of the tray and push up against the rear ledge, see diagram 7.
7
AR0365
3.10Locate the front coal moulding in front of the flame baffle ensuring that the end legs sit flat against the burner skin, see diagram 8.
8
AR0366
3.11Place three large coals on the front coal so that they lean against the flame baffle, and the four large coals on the flame baffle so that they sit on the fingers, see diagram 9.
9
3.12Place two small coals at each end of the front coal so that they lean against the flame baffle, and a further two large coals on the flame baffle, one at each end, see diagram 10
10
AR0368
3.12Place five small coals along the rear of the flame baffle, resting against the rear ledge, see diagram 11.
11
AR0369
3.14Ensure that the fibreglass seal on the back of the door is intact, locate the door on the four studs and slide back to the firebox. Secure in place using the four dome nuts and the tool supplied, do not over tighten the nuts, see diagram 12. Keep the tool with these instructions for future use.
NEVER OPERATE THE STOVE WHEN THE DOOR IS REMOVED OR WHEN THE GLASS IS BROKEN.
12
AR0367
AR0390
12