Stovax Coal Effect Stove Range Conventional Flue manual Commissioning

Page 14

INSTALLATION INSTRUCTIONS

COMMISSIONING

1.COMMISSIONING

1.1Close all openable doors and windows in the room. Ignite the stove and operate on maximum for 10 minutes. Position a lighted smoke match just inside the draught diverter opening and check that all smoke is drawn into the opening. In restricted locations a mirror can be used. See diagram 1. If there is any doubt, run the stove for a further 10 minutes, and repeat the test.

1

1.2If there are any extractor fans in adjacent rooms, the test must be repeated with the fans running on maximum and interconnecting doors open.

IF SPILLAGE PERSISTS, DISCONNECT THE APPLIANCE AND SEEK EXPERT ADVICE.

For future reference record the installation details on the Appliance Commissioning Checklist of these instructions.

14

Image 14
Contents Ceramica Coal Effect Stove Range Contents GAS Check Appliance Commissioning ChecklistFlue Check Pass Fail Lighting the Appliance User InstructionsGeneral Upgrading Your Stove Cleaning the FireTurning the Stove OFF Fuel BED ArrangementMedium Ceramica Flame Failure Device Installation DetailsGazco Flue Sure System RunningInstallation Instructions Technical SpecificationFlue and Chimney Requirements Installation of the GAS SupplySite Requirements Appliance LocationSafety Precautions InstallationControl Upgrade Installation of the StoveInstallation Instructions Medium Ceramica Lighting Commissioning CommissioningServicing / Fault Finding Charts Servicing InstructionsFlame Failure Functional Check Fault Finding ChartsIgnition Functional Check Replacing Parts Burner Unit RemovalPilot Unit GAS Valve Ignition Lead and PiezoPiezo Main Injector Magnetic Safety ValvePrimary Aeration Plate Changing Between GAS Types Short Spares ListService Records Member of the Stovax Group