Standard Accessories (Figure 5)
A.Spindle Nut Wrench
B.Spindle Wrenches
C.
D.Hex Wrenches
E.Spindle Collet
F.Spindle Nut
G.Lock Nut
H.Draw Bar
J.Grease Gun
K.Table Inserts
L.Interchangeable
Spindles | FIGURE 5 |
UNPACKING
Open shipping container and all separate cartons con- taining accessories. Report any damage immediately to your distributor. Read the instruction manual thor- oughly for assembly, alignment, maintenance and safety instructions.
Crate contents: 1 shaper
1 | fence assembly |
|
1 | dust chute |
|
1 | mitre gauge and clamp assembly |
|
1 | aluminum fence |
|
1 | box of standard accessories (see above) | FIGURE 6 |
INSTALLATION AND ASSEMBLY
Tools required
crane with hoist; or forklift 9/16", 7/16" and 1/2" wrenches
1.Remove all wood crating from around the shaper.
2.Remove the bolts securing the machine to the
skid.
3.The shaper can be lifted by a crane with hoist (Figure 6), or by a forklift (Figure 7), either of which
should be capable of lifting one ton. Remove the skid | FIGURE 7 | |
from under the shaper. | ||
|
4.The shaper should be mounted to a solid, level foundation, preferably a concrete floor. With machine in position, check table surface left to right and front to back with a machinist's level. If necessary, place metal shims under the corners of the machine to en- sure it is level.
9
