Powermatic instruction manual Specifications Model TS29 Spindle Shaper

SPECIFICATIONS: Model TS29 Spindle Shaper

Motor	TEFC 7.5HP, 3Ph, 230/460V, 60Hz
Starter	230/460V Magnetic w/ 24V low voltage control circuit
Overall dimensions	51-1/4" L x 44" W x 53" H
Table size	51-1/4" L x 33-1/2" W
Sliding table size	51-1/4" L x 11-1/4" W
Sliding table travel	49-1/4"
Tilting spindle	5 degree back, 45 degree forward
Spindle travel	7"
Spindle speed	3000-4000-6000-8000-10000
Spindles	interchangeable: 1-1/4" x 6"; 1" x 6"; 3/4" x 3-1/4";
	and 1/2" collet chuck with 1/4" bushing
Table inserts (three)	2-1/2" I.D.; 5-1/2" I.D.; Oval slotted
Dust outlet	(two) 5"
Net weight	1183 lbs.

NOTE: The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, Powermatic reserves the right to change specifications without notice and without incurring obligations.

8