Stovax Ceramica Manhattan Wood Stove manual TOP Flue UP & OUT with Additional Bend, ALL Appliances

Page 10

INSTALLATION INSTRUCTIONS

SITE REQUIREMENTS

1.5TOP FLUE UP & OUT WITH ADDITIONAL BEND

Any additional bend may be used on the horizontal section (either 45° or 90°) but the overall horizontal flue run will be reduced.

Refer to diagram 4.

4

AR1300

1.6TOP FLUE VERTICAL KIT (8524/8524AN) -

ALL APPLIANCES

Vertical from the top of the appliance. (See diagram 5). A minimum vertical rise of 3m (9'10") to a maximum of 10m (32'10")

The basic kit comprises: 2 x 1m lengths

1 x 1m terminal lengths

1 x 52mm restrictor

1 x 47mm restrictor

Extra lengths may be added (see section 1.5), with reference to diagram 4 and the installation instructions of the appliance.

Refer to Table A under 3.3, Installation to identify when to use each restrictor.

1.7TOP FLUE VERTICAL OFFSET KIT (8530/8530AN) – ALL APPLIANCES

Used with kit 8524 only, (see diagram 5). A minimum rise of 500mm (191/2") is required to the first bend.

5

AR1299

1.8OPTIONAL EXTRA FLUE LENGTHS & BENDS

Nominal	Actual	Stainless	Anthracite
Length	Length	Finish	Finish
200mm	140mm	8527	8527AN
500mm	440mm	8528	8528AN
1000mm	940mm	8529	8529AN
45° Bend	N/A	8507	8507AN
90° Bend	N/A	8508	8508AN
Optional Flue Collar		N/A	8548
(Stoves Only)

10

Image 10

Contents PR0848 Issue 2 February Ceramica ManhattanContents Flue Check Pass Fail Appliance Commissioning ChecklistGAS Check Lighting the Stove User InstructionsGeneral Turning OFF the StoveHandling & Disposal of Fire Ceramics Cleaning the FireFuel BED Arrangements ‘RUNNING IN’ Installation DetailsFlame Failure Device ServicingInstallation Instructions Technical SpecificationFlue and Chimney Requirements Site RequirementsTimber Framed Buildings TOP Exit Guard SuppliedOptional Extra Flue Lengths & Bends TOP Flue UP & OUT with Additional BendALL Appliances Nominal Actual Stainless AnthraciteAppliance Location Installation of the GAS SupplyVentilation Appliance requires no additional ventilationSafety Precautions InstallationControl Upgrade Installation of the StoveDo not FIX the Flue AT this Stage AR0490 Table a TOP Exit Flue Vertical and Horizontal Restrictors Vertical & Horizontal FlueVertical Flue Height Horizontal Length Restrictor Size Remove ANY Cardboard Fitment Remaining TOP Exit Vertical FlueTable a TOP Exit Vertical only Including Offset Vertical Height Restrictor SizeFuelbed Arrangements Lighting Commissioning CommissioningServicing Requirements Servicing / Fault Finding ChartsServicing Instructions Ignition Functional CheckPilot will not Stay LIT or Fire Goes OUT in USE Flame Failure Functional CheckNo Spark Main Burner Replacing PartsPilot Unit Ignition Lead GAS Valve Magnetic Safety ValvePiezo Main InjectorChanging Between GAS Types Primary Aeration PlateShort Spares List Service Records Member of the Stovax Group