11.With a #3 Phillips screwdriver, replace the 4 hinge screws in the door. Do not tighten.
A
C
B
A. Top hinge screws (2)
B. Bottom hinge screws (2)
C. Hinges (2)
AttachCondiment Shelf- Styles1 and2
1.Open access door.
2.Use a short #2 Phillips screwdriver or a 90° screwdriver with a #2 Phillips screw bit to loosen the 2 mounting screws on the inner door panel.
A
12.With a #2 Phillips screwdriver, replace the screws around the perimeter of the inner door but do not tighten. After all the screws have been installed, tighten the screws.
13.Tighten the 4 hinge screws.
To replace the door into the frame:
1.Slide the door hinges into the slots in the frame and push in to seat hinges.
2.Locate the 4 hinge screw mounting holes through the top and bottom of the frame and replace the 4 screws. Do not tighten.
3.Check and adjust door then tighten the screws. See “Access Door Alignment - Style 2 Only.”
4.Install 18" (45.7 cm) access door assembly into cabinet cutout. See “Install Access Door - Style 2.”
A. Mounting screws
3.Position the condiment shelf so that the large ends of the keyhole slots are over the 2 mounting screws.
A
B
A. Mounting screw in keyhole slot
B. Condiment shelf
4.Lower the condiment shelf until the 2 mounting screws are in the narrow ends of the keyhole slots.
5.Tighten the screws.
10