InSinkErator F-C1100, CWT-00 Package Components, White Tubing Blue Tubing, Cold Only Faucet

Page 3

HOW TO USE THIS INSTRUCTION MANUAL

These instructions are separated into main sections, indicated by numbers, and subsections, indicated by capital letters. The manual is setup this way to allow you to take a break at any point after completing a section or subsection without affecting the installation process.

What you’ll see in the instruction manual:

B

Outlet

2

3

Property Damage: Do not pinch or break tubing.

Do not distort the last 1 inch of tubing.

Attach supplied quick connect elbow to end of supplied blue 1/4" tube.

Attach quick connect elbow with blue tube to water Outlet on front of chilled water tank.

Measure distance from tank outlet to

water supply line on

1

. Carefully

trim blue tube to correct

.

Using quick connect elbow, connect blue tube to faucet water supply.

1Provides a step-by-step narrative describing the installation step, with check boxes that can be marked as you progress through the installation.

2Contains simple illustrations that provide visual instruction to support the narrative.

3CAUTIONS, WARNINGS and DANGERS that will require your attention during the step.

An imminently hazardous situation, which, if not avoided, will result in death or serious injury.

A potentially hazardous situation, which, if not avoided, could result in death or serious injury.

A potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.

PACKAGE COMPONENTS

CWT-00

White Tubing - 4'

Blue Tubing - 4'

C1100

Rubber O-Ring

Hex Nut

“Y” Quick Connector

Semi-circular Mounting Plate

Quick Connect Elbows (3)

Chilled Water Tank

Cold Only Faucet

Hex Tool

3

Image 3
Contents Chilled Water Tank & Cold Only Faucet What YOU should Know Before YOU Begin Package Components White Tubing Blue TubingCold Only Faucet Apreparation Shown with optional filtrationOn top of chilled water tank which Could obstruct the fan Do not distort the last 1 inch of tubing Installing the Water TankWater Connection Remove existing Y quick-connect fitting and discardFill Tank & Connect Power Preparation Overview of a Typical Installation with Cold Only FaucetInstalling the Cold only Faucet White 1/4 tube into the 1/4 Install a T-fitting not includedOnto the cold water supply line With 1/4 compression fittingCWT-00 Tank Year warranty C1100 Faucet Warranty InformationTo the OFF position Care and USEOn the front of the unit Replace all cut, loose or split tubingFiltration Issues Filtration available as an option TroubleshootingSierra perforadora / sacabocados Llave de plomería Manual del propietarioCómo Utilizar Este Manual DE Instrucciones Componentes DEL PaquetePreparación Conexión DE Agua Instalación DEL Tanque DE AguaHasta que salga agua del surtidor Abra el suministro de agua fríaPulse la palanca del suministro de Agua fría y manténgala presionada279 Instalación DEL Grifo DE Agua Fría DEL Suministro Eléctrico Llenado DEL Tanque Y ConexiónTanque CWT-00 Años de garantía Grifo C1100 Información Sobre LA GarantíaCuidado Y USO La unidad inmediatamenteFlojos o agrietados Solución DE Problemas Problemas DE Filtración Filtración disponible a elecciónEl agua no está fría 800.558.5700