THE RECORDING FUNCTION
You can record from a radio broadcast, USB device, or an external source to a USB storage device.
1.Connect an external USB storage device to the USB 2 
port on your product.
2.Tune to a station or connect an external source to your product.
Tuner
•Select 
FM by pressing the SOURCE button
on the remote control or the ( 
) button on the product's front panel.
•Tune to a station you want to record.
External Source
•Connect an External Component/MP3 player to your product.
•Press the SOURCE button on the remote control
or the ( 
) button on the product's front panel
repeatedly to select < 
AUX 1> input or
< 
AUX 2> input.
•Play a song from the external device.
USB 1
•Connect a USB device to the USB 1 jack of your product
•Press the SOURCE button on the remote control
or the ( ) button on the product's front panel
repeatedly to select < | USB 1> input. |
•Play a song from USB 1.
3.Press the USB REC button on the remote control to start recording.
USB 1
•Press the USB REC button on the remote control. The currently playing file is copied onto the USB 2 device.
•Press and hold the USB REC button. All the files in the current folder are copied onto the USB 2 device.
"COPY" is displayed. When the recording is done, “@” will be displayed.
•If there is a duplicate file name, "FILE EXIST" is displayed, and the function is canceled.
Tuner
•"FM RECORD" is displayed. External Source
•"AUX RECORD" is displayed.
4.To stop recording, press the STOP (@) button on the remote or the PLAY/PAUSE (p) button on the product's front panel. The unit automatically creates and saves recorded files in .MP3 format
●● Do not disconnect the USB device or the AC Cord during recording as this may cause damage to the file.
●● If you disconnect the USB device during a recording, the unfinished recording file may get damaged and cannot be deleted. If this occurs, connect the USB device to a PC, backup the data stored in the USB, and then format it.
FUNCTIONS
●● When the USB memory has insufficient free space, the system will display “NOT ENOUGH MEMORY”.
●● The USB device or HDD you are recording to must be formatted in the FAT file system. The NTFS file system is not supported.
●● The recording time may be longer with some USB devices.
●● The REPEAT and SOUND EFFECT function is set to "OFF" automatically and is not available during recording.
●● Note that setting the input level too loud when recording music from an external device through the AUX or USB channel may cause noise in the recording. If this occurs, lower the external device’s volume level.
●● The maximum TUNER/AUX recording time is 5 hours.
SOFTWARE UPGRADE
Samsung may offer upgrades for the Wireless Audio - SoundTower system firmware in the future.
If an upgrade is offered, you can upgrade the firmware by connecting a USB drive with the firmware upgrade stored on it to the USB port on your product.
Note that if there are multiple upgrade files, you must load them onto the USB drive singly and use them to upgrade the firmware one at a time.
Please visit Samsung.com or contact the Samsung Call Center to receive more information about downloading upgrade files.
USB port
●● Insert a USB drive containing the firmware upgrade into the USB port on the main unit.
●● Do not disconnect the power or remove the USB drive while upgrades are being applied. The main unit will turn off automatically after completing the firmware upgrade.
●● When software is upgraded, settings you have made will return to their default (factory) settings.
●● We recommend you write down your settings so that you can easily reset them after the upgrade.
●● Once the software upgrade is completed, turn on the product and then press and hold the (@) button for a while in USB 1 mode to reset the product.
●● If the firmware fails to upgrade, we recommend formatting the USB device in FAT16 and trying again.
●● Do not use a USB thumb drive formatted in the NTSF format to upgrade the SoundTower. For upgrading purposes, the SoundTower does not support the NTFS format.
●● Depending on the manufacturer, some USB devices may not be supported.
ENG
17