DESCRIPTIONS
DESCRIPTIONS
REAR PANEL
AUX IN 2
Connect to the Audio Out of an external analog component (for example, a receiver).
FM ANT
Connecting the FM Antenna
1.Connect the FM antenna supplied to the FM ANTENNA Jack.
2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
SPEAKER OUTPUT CONNECTORS |
Connect to the speakers. |
ONLY FOR SERVICE
This jack is for service only. Please do not use.
AUX IN 1
Connect to the Analog output of an external device.
POWER SUPPLY IN
Connect the AC power adaptor to the power supply jack, and then connect the AC power adaptor plug to a wall outlet.
DIGITAL AUDIO IN (OPTICAL)
Connect to the digital (optical) output of an external device.
●● Do not connect this unit or other components to an AC outlet until all connections between components are complete.
●● For safety information including product identification and supply ratings, please refer to the main label on the bottom of the device.
ENG
7