•Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmit- ted to a TV is digital. Therefore either a
•What is the HDCP?
HDCP
E. Connection to an Audio System (2 Channel Amplifier, Dolby Digital, MPEG2 or DTS Amplifier)
1.Using the audio cables, connect the AUDIO (red and white) OUT terminals or 5.1CH (Front
2.Using the video signal cable(s), connect the VIDEO, COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO, COMPONENT or DVI IN terminals of your TV
3.Turn on the DVD player, TV, and Amplifier.
4.Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
|
|
| ||
Dolby digital or |
| Dolby digital or |
| |
| DTS amplifier |
| ||
| DTS amplifier |
|
|
|
| E | Coaxial Cable | E | Coaxial Cable |
Basic functions
Playing a Disc
Before Play
-Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV remote control.
-If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
After plugging in the player, the first time you press the DVD POWER button, this screen comes up: If you want to select a language, press the button, and then press the ENTER button. (This screen will only appear when you plug in the player for the first time.) If the language for the startup screen is not set, the settings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use.
Once you select a menu language, you can change it by pressing the ■/ button on the front panel of the unit for more than 5 seconds with no disc in the unit. Then the SELECT MENU LANGUAGE window appears again where you can reset your preferred language.
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection.
Searching through a Chapter or Track
During play, press the SEARCH (k or K) button on the remote control for more than 1 second.
WHITE |
|
|
BLUE GREEN | OR | BLUE GREEN |
|
| RED |
|
|
|
|
|
| RED | WHITE |
|
|
| RED |
|
|
|
| YELLOW | RED |
|
|
|
| YELLOW |
|
| |||||
|
|
|
|
| Audio Cable |
| Scart | B | Video |
| D | ||||
Scart Cable | Audio Cable | B | Video | Component D |
|
|
| Cable | Cable | C | |||||
A |
|
| Cable C | Cable | OR |
|
|
| A |
|
| OR | |||
RED | WHITE | YELLOW RED BLUE GREEN |
|
| RED | WHITE | YELLOW RED BLUE | Component Cable | |||||||
|
|
|
| HDMI Cable | GREEN | HDMI Cable | |||||||||
DVD | 2X, 4X, 8X, 16X, 32X |
|
|
CD | 2X, 4X, 8X, 16X, 32X |
Skipping Tracks
Note
-The speed marked in this function may be different from the actual playback speed.
-No sound is hearing during search mode (Except CD).
| WHITE |
|
|
| |
| RED |
|
|
| |
|
| Do not use the connection | RED | WHITE | |
| Audio Cable |
| Audio Cable | ||
RED | RED | WHITE | |||
WHITE | Scart and Component Video | ||||
|
|
|
|
(Y, Pb, Pr) simultaneously. |
F.Connection to a 5.1CH Analog Amplifier (Only DVD-C550K)
During play, press the SKIP (k or K) button.
- When playing a DVD, if you press the SKIP (K) button, it moves to the next chapter. If you press the |
SKIP (k) button, it moves to the beginning of the chapter. One more press makes it move to the begin- |
ning of the previous chapter. |
- When playing a CD in Menu Off mode, if you press the SKIP (K) button, it moves to the next track. If |
you press the SKIP (k) button, it moves to the beginning of the track. One more press makes it move |
1.If using audio cables for 5.1 CH Analog Amplifier connect the 5.1CH ANALOG AUDIO OUT terminals on the rear of the DVD player to the 5.1CH ANALOG AUDIO IN terminals of the 5.1CH Analog Amplifier.
2.Using the video signal cable(s), connect the VIDEO, COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO, COMPONENT or DVI IN terminals of your TV.
3.Turn on the DVD player, TV, and Amplifier.
4.Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
| RED | WHITE | BLACK |
F | RED | WHITE | BLACK |
|
|
| |
|
|
| 5.1ch Analog |
|
|
| Amplifier |
to the beginning of the previous track. |
Using the Display Function
When Playing a DVD/MPEG4
1.During play, press the TOOLS button on the remote control.
2. | Press the | / | buttons to select the desired item. |
3. | Press the | / | buttons to make the desired setup. |
4.To make the screen disappear, press the TOOLS button again.
5 |