CONNECTING TO YOUR TV
You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.
cImportant: Before you begin, put the battery into the remote. See page 13 for instructions.
Method 1. Connecting with a Cable
Check the DIGITAL AUDIO IN (OPTICAL) port of the Soundbar main unit.
Soundbar
DIGITAL AUDIO IN
(OPTICAL)
Bottom of Soundbar
OPTICAL OUT | Optical Cable |
(not supplied) |
Check the OPTICAL OUT
port of your TV.
1.Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable (not supplied).
2.Press the
button on the right side of the Soundbar or the SOURCE button on the remote control to select the D.IN mode.
D.IN
cIf TV sound is not output, press the
button on the right side of your Soundbar or the SOURCE button on the remote control to select the D.IN mode on Soundbar main unit display.
cPress the button on the remote control for 5 seconds to turn Auto Power Link on or off. (Auto Power Link is set to ON by default.)
· 5 · English