Components of your camera
Your camera has the following components:
12
3
45
| 6 |
Lens | @ |
|
78 
9 0 !
#
$
Video connector
Power connector
1.Cover dome: Covers the inner cover, lens, and main body to protect them.
2.Inner cover: Covers the main body to protect it.
3.Wing locker: Push a long thin screwdriver into its narrow spot and press it outward when you want to remove the inner cover.
4.Main body: Includes a lens, a switch board, a PCB board, screws, and such.
5.Mount bracket: Used as a ceiling or wall fixture. It is fixed using three long tab screws provided in the package.
6.Ceiling mount opener: Remove it for line connection to the ceiling when it is installed on the ceiling.
7.Zoom lever: Using this lever, the lens zoom can be adjusted and fixed.
8.Focus lever: The lens focus can be adjusted by rotating it left or right. Rotate it clockwise for fixing.
9.Tilt fixing screw: Using this screw, the slope of the lens can be adjusted and fixed.
10.Switch board: Includes two kinds of control switches such as function switches and
11.Groove mark: To attach the Main body to the Mount bracket, align this groove mark on the Main body with the wide groove in the CAMERA FRONT side on the Mount bracket.
12.Locker: Used to open or close the Cover dome. To open the cover dome, press the locker.
13.Lock releaser: Push it outward and rotate the main body in UNLOCK direction when you want to remove the Mount bracket from the Main body or to remove the installed camera from the Mount bracket.
14.Cable: Connect the Video connector to BNC cable and Power connector to power adapter.
ENG
7 