Installation Methods

The Discovery Thermostatic Shower Control can be installed using Rear Fixing Points on the Body, or by using the Securing Brackets (supplied) on the Front Face of a Solid Wall or Stud Partition, or on the Rear Face of a Laminated Panel.

For installation from the front face into a

Solid Wall or Stud Partition using the

Securing Brackets, go to section:

‘Installation, 1. Solid Wall or Stud Partition (Using Securing Brackets - Mounting off Front Face)’.

For installation from the front face into a

Solid Wall or Stud Partition using the Rear

Fixing Points, go to section: ‘Installation,

2.Solid Wall or Stud Partition (Using Rear Fixing Points on Shower Control)’.

For installation behind a Laminated Panel using the Securing Brackets, go to section:

‘Installation, 3. Laminated Panel (Using Securing Brackets - Mounting off Rear Face)’.

Warning! Bottom bracket not to be drilled or screwed to.