installing your microwave oven
Installing your oven
Place the oven on a flat level surface 85cm above the floor. The surface should be strong enough to safety bear the weight of the oven.
tOsven 01 iInngllathe
•When you install your oven, make sure there is adequate ventilation for your oven by leaving at least 10 cm (4 inches) of space behind and, on the sides of the oven and 20 cm (8 inches) of space above.
•This microwave oven has to be positioned so that plug is accessible.
20cm above | 10cm behind |
|
|
85cm of | 10cm on | |
the side | ||
the floor | ||
|
• If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. For your personal safety, plug the cable into a 3-
pin, 230 Volt, 50Hz, AC earthed socket. If the power cable of this appliance is damaged, it must be replaced by a special cable.
•Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven. Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.
Handling, installing and removing the water tray
1.Before installing or removing the water tray, remove the water tank from the main unit.
2.This is a plate that holds food remains or moisture in the door Insert it in the
direction of the arrow towards the front panel.
3.To remove the tray, pull it out.
4.Please be careful, as there may be water inside.
installing the oven _7