Air flow is detected around the door and outer casing.
•This is a normal occurrence.
Light reflection around the door and outer casing.
•This is a normal occurrence.
Steam escapes from around the door or vents.
•This is a normal occurrence.
A clicking sound occurs while the oven is operating, especially in defrosting mode.
•This is a normal occurrence.
Error and Safety codes
Error Code | General Functions |
|
|
| TEMP SENSOR OPEN |
| In case the value of the temperature sensor is more than 250 °C |
| during operation / cancellation. |
|
|
| TEMP SENSOR SHORT |
| In case the value of the temperature sensor is less than 5 °C |
| during operation / cancellation. |
|
|
| UNFINISHED PREHEAT |
| In case the oven has not reached the desired temperature |
| although a ceratin amount of time has passed (unfinished preheat) |
|
|
| OVER 230 °C DURING OPERATION OF MWO MODE |
| In case the temperature rises over 230 °C during operation of |
| mwo mode (fire sensed). |
|
|
| STEAM SENSOR OPEN |
| In case the value of the temperature sensor is less than 250 °C |
| after operation of the steam heater for a certain time. |
|
|
| STEAM SENSOR SHORT |
| In case the value of the temperature sensor is less than 5 °C after |
| operation of the steam heater for a certain time. |
|
|
| DESCALE MAX. TIME OVER (or STEAM USE MAX. TIME OVER) |
| In case the steam operation time after the descaling message has |
| been passed. |
|
|
| POWER ON EEPROM COMMUNICATION ERROR |
|
|
| EEPROM READ / WRITE ERROR |
|
|
| DO NOT SENSE DAMPER MOTOR FOR 1MIN |
|
|
52_ troubleshooting and error code