MAKING ICE
Ice tray may look different depending on models.
Making ice cubes
Freezing time
It is recommended that you wait for about one hour with the temperature set to Power Freeze for the ice cubes to form.
Removing the ice cubes
1.Remove the ice cube tray by pulling it towards you.
2.Fill the tray with water up to the maximum water level marked on the tray.
3.Slide the tray back into the holder, taking care not to spill the water.
4.Wait until the ice cubes are formed.
XBUFS |
MFWFM |
1. Make sure that the ice bin is in place under the ice tray. If not, slide it into place.
2. Twist one of the levers firmly in the clockwise direction until the tray twists slightly. The ice cubes fall into the storage bin.
3.Repeat Step 2 for the other half of the tray, if necessary.
4.To get ice, slightly lift up the ice tray and pull it towards you.
maintaining your freezer
REMOVING THE INTERIOR PARTS
Some of the features can be different and may not be available depending on the model.
Top shelf cover
1. Push the right side of cover inward until you can get the projection on the left side out.
2. When both sides of the projections are out of the grooves, pull it
towards you to remove the cover.
Make sure that you remove the top shelf cover when you assemble or disassemble the glass shelf.
Twist ice maker
Slightly lift up the twist ice maker and pull it towards you.
Boxes
Pull the boxes out fully then slightly lift it up to remove the boxes. (Small box/Fresher box/Big box)
Tempered glass shelf
Gently lift up the shelves with both hands and pull it toward you.
16_ maintaining