Samsung AR18JQFSBWKXMG, AR18JQFSBWKNMG, AR18JRSDBWKNMG, AR18JQSDBWKXMG manual Basic function

Basic function

Basic operation is an operation mode that can be selected by pressing the Mode button.

Auto

In Auto mode, the air conditioner will automatically set the temperature and fan speed depending on the room temperature..

Cool

In Cool mode, the air conditioner will cool your room.. You can adjust the temperature and the fan speed to feel cooler in hot season..

•If current outside temperature is much higher than the selected indoor temperature, it may take time to bring the inner temperature to the desired coolness..

Dry

The air conditioner in Dry mode acts like a dehumidifier by removing moisture from the indoor air.. Dry mode makes the air feel refreshing in a humid climate..

To activate the Dry mode, set temperature on the remote controller should be lower than indoor room temperature..

Fan

Fan mode can be selected to circulate your room.. Fan mode will be helpful to refresh the stale air in your room..

Heat

The air conditioner heats as well as cools.. Warm your room with this versatile appliance in the cold of winter..

•Fan may not operate for about 3~5 minutes at the beginning to prevent any cold blasts while the air conditioner is warming up..

•Since the air conditioner heats the room by taking heat energy from outdoor air, the heating capacity may decrease when outdoor temperature is extremely low..

Use an additional heating appliance in combination with the air conditioner if you feel the air conditioner heats insufficiently..

02 BASIC FUNCTION

• Only Heating models have this function : AR✴✴JQ✴✴ series.

English-15

MG_BETTER_ON&OFF_A3050_IB&IM_EN_DB68-04534A.indd 15

2014/9/26 16:28:01