Samsung AR18JQSDBWKXMG, AR18JQFSBWKNMG Using the Virus Doctor function, English-24, Will begin

Page 24

Using the Virus Doctor function

This function will produce positive ions and supply them into the airflow.

When the air conditioner is operating;

1.

Press the Options button..

2.

Press the

button until ( ) indicator starts to blink..

3. Press the SET button to set the Virus Doctor function..

-- (

 

) will blink first, then remain on the display as ( ) and Virus Doctor function

will begin..

Cancel

fFPress the Options button again to make the ( ) indicator blink and

 

 

press the SET button..

• Virus Doctor function can be selected while Auto/Cool/Dry/Fan/Heat (ARJQ) mode is on..

• Set temperature can be adjusted.

• There will not be much difference on energy consumption and operating noise when the Virus Doctor function is selected additionally while the other function is on.

• When the Virus Doctor function is selected with other operation mode, pressing the Power button will stop the operation.

Remote controller display

English-24

MG_BETTER_ON&OFF_A3050_IB&IM_EN_DB68-04534A.indd 24

2014/9/26 16:28:05

Image 24
Contents Air Conditioner Features of your new air conditioner Contents Safety precautions English-4For Power Supply English-5For Using English-6English-7 Do not place objects or devices under the indoor unit English-8For Cleaning English-9Checking before use Operation rangesEnglish-10 Technical Specifications English-11Checking the name of the parts Main partsDisplay English-12Checking the remote controller Remote controller buttonsEnglish-13 Remote controller display Low Battery warningStoring the remote controller Inserting the batteriesBasic function Press the button to adjust the temperature Press the button to set the desired fan speedEnglish-16 Adjusting the air flow direction English-17Setting the On/Off timer Setting the On timerWhen the air conditioner is off English-18Setting the Off timer When the air conditioner is onEnglish-19 Mode English-20Additional options available When the air conditioner is operating in Cool mode Step cooling function English-21 Using the Fast function Using the Comfort functionEnglish-22 Using the Single user function Single user function is only available in Cool modeEnglish-23 Blink and press the SET buttonUsing the Virus Doctor function When the air conditioner is operatingEnglish-24 Press the SET button to set the Virus Doctor functionUsing the Auto clean function Checking the usage timeEnglish-25 Setting the Beep sound Resetting the Filter clean reminderSetting the Display option English-26Cleaning the air conditioner Cleaning the indoor unitCleaning the outdoor unit heat exchanger English-27Cleaning the Air filter Removing the Air filterEnglish-28 Remove the Air filter from the main bodyReassembling the Air filter English-29Top of the Air filter into the main body.. ➀ Maintaining the air conditioner English-30Troubleshooting TemperatureAdjustment is not English-31Button or disconnect the power plug/switch Check the Drains have been cleared Regular MaintenanceError is indicated Heard when refrigerant flow movement changes. It is normalGeneral information English-33Choosing the installation location Installing the unitPower supply line, fuse or circuit breaker Indoor unitWhere sulfide gas exists Outdoor UnitEnglish-35 When installing more than 1 outdoor unit When the air outlet is towards the wallEnglish-36  Figure DescriptionAccessories Accessories in the indoor unit caseAccessories in the outdoor unit case English-37Fixing the installation plate Optional accessoriesTools required for installation General Tools Tools for test operationsAssembling the hanger screw English-39This QR code for detail video of indoor unit installation Removing the screwsRemoving the Cover panel Before mounting the indoor unit English-40Assembling the Cover panel After mounting the indoor unit English-41Connecting the assembly cable Cable specificationConnecting the cable English-42Extend the assembly cable if necessary Each wire is labeled with the corresponding terminal numberEnglish-43 English-44 Smooth the cut edgesCut off the remaining foam insulation TorqueEvacuating the indoor unit Cutting or extending the pipeEnglish-45 English-46 Correct InclinedCracked Drain hose installation English-47Change the direction only when it is necessary English-48Shield Downwards as seen in the pictureEvacuating the connected pipes English-49Connect a drain hose to the drain plug Ensure that condensation draining is adequateAdding Refrigerant English-50Outer Torque English-51 Cylinder with siphonPlease fill in with indelible ink 1975Performing the gas leak tests English-52Outdoor unit installed on the wall by rack Fixing the outdoor unit in placeEnglish-53 18/24JR 660 340 18JQ 24JQ 645Smart Install mode English-54English-55 Off / Blinking / OnFinal check and trial operation English-56Packing and unpacking guide English-57How to connect your extended power cables English-58Apply heat to the contraction tube to contract it After tube contraction work is completed, wrap it withEnglish-59 Questions or COMMENTS? 0211
Related manuals
Manual 58 pages 49.13 Kb Manual 60 pages 59.79 Kb