Samsung AR18JRSDBWKNMG Using the Single user function, English-23, Blink and press the SET button

Using the Single user function

This function will reduce the energy usage while the air conditioner is operating in Cool mode.

When the air conditioner is operating in Cool mode;

1. Press the Options button..

2. Press the button until (Single user) indicator starts to blink..

3. Press the SET button to set the Single user function..

-- (Single user) will blink first, then remain on the display as (Single user).. Then

will be displayed on the set temperature indicator part for few seconds and Single user function will begin..

-- When the Single user function is on, vertical air swing will turn on automatically..

-- If the current set temperature is lower than 24°C in Cool mode, it will be automatically raised to 24 °C.

Cancel	fFPress the Options button again to make the (Single user) indicator
	blink and press the SET button..

• Single user function is only available in Cool mode.

• If the Single user function is selected while Fast/Comfort function is on, corresponding function will be cancelled..

• Vertical air swing will remain on even after the Single user function is cancelled.

Remote controller display

Additional options available in Single user function

You can adjust the set temperature by 1 °C within the range of 24 °C ~ 30 °C in Cool mode..

(Auto), (Low), (Med), (High), (Turbo) can be selected..

Vertical/Horizontal air swing can be selected..

04 OPTIONS

English-23

MG_BETTER_ON&OFF_A3050_IB&IM_EN_DB68-04534A.indd 23

2014/9/26 16:28:05