Samsung AR24JQSDBWKNMG, AR18JQFSBWKNMG, AR18JQFSBWKXMG Assembling the hanger screw, English-39

Page 39

1. Disassemble the cover panel as described in page 40~41.

2. Remove the Hanger plate from the indoor unit.

(1) Unscrew 2 screws that fixes the Hanger plate to the indoor unit.

(2) Push the hooks (on the bottom part of the indoor unit) up to release the installation plate from the hooks that holds it.

(3) Pull the installation plate to release it completely from the indoor unit.

Screw

3. Determine the position of the pipe and drain hose hole as seen in the picture and drill the hole with an inner diameter

of 65 mm so that it slants slightly downwards.

Pipe hole (Ø65 mm)

07 INSTALLATION

A

B

D

C

(Unit : mm)

Model

A

B

C

D

18/24

33

110

110

33

4. Fix the indoor unit.

If you fix the indoor unit on a wall

Make sure to drill only one hole after choosing the direction of the pipe.

(1) Fix the installation plate to the wall giving attention to the weight of the indoor unit.

• If you mount the plate to a concrete wall using plastic anchors, make sure that gaps

between the wall and the plate, created by projected anchor, is less than 20 mm.

If you fix the indoor unit on a window frame

Plastic

Anchor

< 20 mm

Wall

(1)Determine the positions of the wooden uprights to be attached to the window frame.

(2)Attach the wooden uprights to the window frame giving attention to the weight of the indoor unit.

(3)Attach the installation plate to the wooden upright using tapping screws.

If you fix the indoor unit on a gypsum board

(1)Use stud finder to find out locations of the studs.

(2)Fix the plate hanger on two studs.

• Search for other spots if there are less than two studs, or the distance between the studs are different from the plate hanger.

Fix the installation plate without inclining to one side.

Make sure that a wall can withstand the weight of the product. If you install the product in a place where it is not

strong enough to withstand the product weight, the unit could fall and cause injury.

Assembling the hanger screw

Use 2 screws to fix the indoor unit with hanger plate as shown in the picture.

Screw

English-39

MG_BETTER_ON&OFF_A3050_IB&IM_EN_DB68-04534A.indd 39

2014/9/26 16:28:09

Image 39
Contents Air Conditioner Features of your new air conditioner Contents English-4 Safety precautionsEnglish-5 For Power SupplyEnglish-6 For UsingEnglish-7 English-8 Do not place objects or devices under the indoor unitEnglish-9 For CleaningChecking before use Operation rangesEnglish-10 English-11 Technical SpecificationsEnglish-12 Checking the name of the partsMain parts DisplayChecking the remote controller Remote controller buttonsEnglish-13 Inserting the batteries Remote controller displayLow Battery warning Storing the remote controllerBasic function Press the button to adjust the temperature Press the button to set the desired fan speedEnglish-16 English-17 Adjusting the air flow directionEnglish-18 Setting the On/Off timerSetting the On timer When the air conditioner is offSetting the Off timer When the air conditioner is onEnglish-19 Mode English-20Additional options available When the air conditioner is operating in Cool mode Step cooling functionEnglish-21 Using the Fast function Using the Comfort functionEnglish-22 Blink and press the SET button Using the Single user functionSingle user function is only available in Cool mode English-23Press the SET button to set the Virus Doctor function Using the Virus Doctor functionWhen the air conditioner is operating English-24Using the Auto clean function Checking the usage timeEnglish-25 English-26 Setting the Beep soundResetting the Filter clean reminder Setting the Display optionEnglish-27 Cleaning the air conditionerCleaning the indoor unit Cleaning the outdoor unit heat exchangerRemove the Air filter from the main body Cleaning the Air filterRemoving the Air filter English-28Reassembling the Air filter English-29Top of the Air filter into the main body.. ➀ English-30 Maintaining the air conditionerEnglish-31 TroubleshootingTemperature Adjustment is notHeard when refrigerant flow movement changes. It is normal Button or disconnect the power plug/switchCheck the Drains have been cleared Regular Maintenance Error is indicatedEnglish-33 General informationIndoor unit Choosing the installation locationInstalling the unit Power supply line, fuse or circuit breakerWhere sulfide gas exists Outdoor UnitEnglish-35  Figure Description When installing more than 1 outdoor unitWhen the air outlet is towards the wall English-36English-37 AccessoriesAccessories in the indoor unit case Accessories in the outdoor unit caseTools for test operations Fixing the installation plateOptional accessories Tools required for installation General ToolsEnglish-39 Assembling the hanger screwEnglish-40 This QR code for detail video of indoor unit installationRemoving the screws Removing the Cover panel Before mounting the indoor unitEnglish-41 Assembling the Cover panel After mounting the indoor unitEnglish-42 Connecting the assembly cableCable specification Connecting the cableExtend the assembly cable if necessary Each wire is labeled with the corresponding terminal numberEnglish-43 Torque English-44Smooth the cut edges Cut off the remaining foam insulationEvacuating the indoor unit Cutting or extending the pipeEnglish-45 English-46 Correct InclinedCracked English-47 Drain hose installationDownwards as seen in the picture Change the direction only when it is necessaryEnglish-48 ShieldEnsure that condensation draining is adequate Evacuating the connected pipesEnglish-49 Connect a drain hose to the drain plugAdding Refrigerant English-50Outer Torque 1975 English-51Cylinder with siphon Please fill in with indelible inkEnglish-52 Performing the gas leak tests18/24JR 660 340 18JQ 24JQ 645 Outdoor unit installed on the wall by rackFixing the outdoor unit in place English-53English-54 Smart Install modeOff / Blinking / On English-55English-56 Final check and trial operationEnglish-57 Packing and unpacking guideAfter tube contraction work is completed, wrap it with How to connect your extended power cablesEnglish-58 Apply heat to the contraction tube to contract itEnglish-59 0211 Questions or COMMENTS?
Related manuals
Manual 58 pages 49.13 Kb Manual 60 pages 59.79 Kb