M-Audio 2626 manual Configuring and Using your DAW to create a Surround Mix

Page 46

ProFire 2626

User Guide

45

Routing your DAW application outputs:

In this scenario, your audio application will output a mix consisting of six channels. The ProFire 2626 Router must be correctly configured so that these channels leave the interface through the correct analog outputs. To make sure all of your outputs are correctly routed, go to the Router tab in the Control Panel:

1.Open the drop-down menu under Analog Out 1/2 and select “SW Return 1/2.”

2.Open the drop-down menu under Analog Out 3/4 and select “SW Return 3/4.”

3.Open the drop-down menu under Analog Out 5/6 and select “SW Return 5/6.”

Configure the Master Volume Knob to Control Your Studio Monitors:

Since your studio monitors are connected to analog outputs 1-6, make sure that the “Analog Out 1/2”, “Analog Out 3/4”, and “Analog Out 5/6” boxes are checked under the “Master Volume Knob” section of the Settings tab. This will ensure that the Master Volume knob (8) on the front panel can be used to simultaneously raise or lower the levels of all six speakers.

Configuring and Using your DAW to create a Surround Mix

Your audio hardware is now set up for surround mixing. Your surround mix channels are routed correctly through the interface and the Master Volume knob can be used to control all six speakers simultaneously.

You may need to configure your audio software further before you can begin mixing. For example, you will need to ensure that your audio application’s left and right channels are being sent to “SW Return 1/2”, the surround left and surround right channels are sent to “SW Return 3/4”, and the center and subwoofer channels are being routed to “SW Return 5/6.” This configuration varies from application to application, but it is usually done through your program’s “Settings” or “Control Panel” menu. Finally, if your DAW offers additional features relating to surround mixing (i.e., video synchronization and/or playback, bass management, etc.), you may need to set up these features as well.

Please refer to your application’s user guide to learn how to do this.

Page 45 Page 47
Image 46
Page 45 Page 47
Contents User Guide ProFire User Guide Midi Introduction Minimum System RequirementsAbout the ProFire 2626 FireWire Audio Interface ProFire 2626 Features Hardware Controls and Connectors Front PanelAbout Phantom Power Rear Panel Architecture of ProFire ProFire ProFire 2626 Operation at High Sample Rates About S/MUX II and S/MUX IV modesMAC OS X 88.2/96 kHz Operation MAC OS X 176.4/192 kHz Operation Windows XP/Vista 88.2/96 kHz Operation Windows XP/Vista UsersWindows XP/Vista 176.4/192 kHz Operation Control Panel Application MixerProFire User Guide Why are software returns disabled? Router Output Source Routing Active Input PortsActive Software Returns Input Channel OrderSettings About Clock Sample Rate ProFire User Guide Master Volume Knob Standalone Mode Mixer Peak MetersAdat D/A Mode Mode File AboutAdditional Functions HelpDigital Clocking Scenario 1 ProFire 2626 as Clock Master Slave Adat aScenario 2 ProFire 2626 Slaved to an Optical Input Master Adat aScenario 3 ProFire 2626 Slaved to S/PDIF Input Master CD PlayerMidi Connection Diagram and Example Scenarios AdatProFire User Guide Example Scenario #1 Recording a Duo Hardware Input and Output ConnectionsHardware Input Instrument Setting up the DSP Mixer Configuring the Mixer, Router, and Settings tabsRouting the DSP Mixer outputs Using the DSP Mixer to create Cue Mixes Disabling unused input portsExample Scenario #2 Mixing in Surround Front Left Front RightConfiguring the Mixer, Router, and Settings tabs Hardware Output Destination SpeakerConfiguring and Using your DAW to create a Surround Mix Troubleshooting Problem No soundProblem No visual activity on Signal/Clip LED indicators ProFire User Guide Warranty Warranty Terms Warranty Registration9329-65015-00
Related manuals
Manual 52 pages 1.3 Kb

2626 specifications

The M-Audio 2626 is a versatile audio interface designed to cater to the needs of music producers, engineers, and podcasters. With its robust feature set, it provides an excellent solution for capturing high-quality audio in both studio and live environments. One of its main attributes is the capability of handling up to 26 inputs and 26 outputs, making it particularly suitable for complex recording sessions involving multiple microphones and instruments.

A standout feature of the M-Audio 2626 is its high-resolution audio conversion, supporting 24-bit depth and sample rates up to 192 kHz. This ensures that recordings maintain clarity and detail, which is essential for professional audio production. The unit employs advanced A/D and D/A conversion technologies, which contribute to its low noise levels and high dynamic range, ensuring your audio is free from distortion.

Connectivity is another strong point. The M-Audio 2626 features a combination of both analog and digital inputs, including eight XLR/TRS combo inputs with phantom power for condenser microphones. This flexibility allows users to integrate various sound sources easily. Additionally, the device includes multiple MIDI inputs and outputs, supporting the integration of MIDI controllers and other gear for comprehensive music production setups.

The interface is equipped with a user-friendly control panel, enabling straightforward navigation through its routing features and settings. Users can easily control levels, monitor audio through reliable headphone outputs, and make adjustments on-the-fly, which is crucial in dynamic recording environments.

In terms of compatibility, the M-Audio 2626 works seamlessly with major digital audio workstations (DAWs) across both Mac and PC platforms. Its class-compliant USB interface allows for quick connection without the need for additional drivers, facilitating an efficient workflow right out of the box.

The device’s rugged design is built to withstand the rigors of daily use, making it an ideal choice for both studio settings and on-the-road applications. Its compact form factor also ensures it won’t take up too much space in your gear bag.

Overall, the M-Audio 2626 stands out as a powerful audio interface that combines high-quality audio performance with a flexible and intuitive design. Whether you're a seasoned professional or an enthusiastic beginner, this interface provides the tools necessary to elevate your audio production experience.
Top Page Image Contents