M-Audio 2626 manual Hardware Controls and Connectors, Front Panel

Page 7
NOTE: The 1/4” line input section of the combo connector (on the rear of the interface) is never sent to the preamp, however, the interface does sum the 1/4” line-level portion of the combo jack and front-panelinstrument-level input. While the summing of these two 1/4” inputs does not affect either input’s impedance or signal level, it does make it possible to record audio from both inputs simultaneously. If you have connected a line-level device to the rear of the interface but only intend to record from the corresponding instrument input on the front, please make sure that the connected device is not outputting any audio (or is powered off).
Setting Gain Levels
To set gain levels for an analog input, begin by turning the Gain Adjustment Knob (4) for that channel fully counter-clockwise. While the sound source is playing at its loudest levels, slowly turn the knob clockwise until the red clip indicator (3) begins to illuminate. Then, turn the knob counter-clockwise until the clip indicator no longer illuminates. At this point, you should be ready to record with the optimum gain setting.
Please keep in mind that the red LED indicates that your input is clipping (distorting) digitally. This is not the same kind of analog-style distortion found on guitar amplifiers and stomp boxes. Digital distortion is generally considered to be harsh and unmusical and it is recommended that you use these LED meters to avoid this type of clipping.

ProFire 2626

 

 

 

 

 

 

 

User Guide 6

5 Hardware Controls and Connectors

1

1

 

 

 

 

 

 

 

2

2

 

 

 

 

 

 

 

3

3

3

3

3

3

3

 

3

4

4

 

4

4

4

4

4

4

5

 

6

6

7

7

 

8

Front Panel

9

10

1.Instrument Inputs (Channels 1/2): These unbalanced 1/4” jacks are used for connecting high impedance instrument-level signals (i.e., electric guitars and basses) to ProFire 2626. When using these inputs, make sure that the Mic/Inst (2) button is set to its “in” position in

order to route the associated instrument input to the preamp.

2. Mic/Inst Buttons: These buttons determine whether the channel’s XLR input (rear-panel combo jack) or the 1/4” instrument input (on the front panel) will be routed to the preamp. When this button is set to the “out” position, the combo jack’s XLR connection will be active and the front panel input will be ignored. Conversely, when this button is set to the “in” position, the channel’s 1/4” front panel input will be active and the combo jack’s XLR connection will be ignored.

3.Signal/Clip Indicators: The green LED indicates

the presence of a signal at the corresponding analog input while the red LED indicates “clipping” or distortion at the input. Use these LED meters to set levels for the eight analog inputs.

4. Gain Adjustment Knobs / 20dB Pads: These are dual function knobs that are used to adjust the preamp gain as well as to engage a 20dB pad. Turn this knob clockwise to increase the input gain for a channel. Pull the knob to the “out” position to engage a 20dB pad or leave the knob in the “in” position to allow signals to bypass the pad.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents User Guide ProFire User Guide Midi Minimum System Requirements IntroductionAbout the ProFire 2626 FireWire Audio Interface ProFire 2626 Features Front Panel Hardware Controls and ConnectorsAbout Phantom Power Rear Panel Architecture of ProFire ProFire About S/MUX II and S/MUX IV modes ProFire 2626 Operation at High Sample RatesMAC OS X 88.2/96 kHz Operation MAC OS X 176.4/192 kHz Operation Windows XP/Vista Users Windows XP/Vista 88.2/96 kHz OperationWindows XP/Vista 176.4/192 kHz Operation Mixer Control Panel ApplicationProFire User Guide Why are software returns disabled? Router Active Input Ports Output Source RoutingInput Channel Order Active Software ReturnsSettings About Clock Sample Rate ProFire User Guide Master Volume Knob Mixer Peak Meters Standalone ModeAdat D/A Mode Mode Help AboutAdditional Functions FileDigital Clocking Slave Adat a Scenario 1 ProFire 2626 as Clock MasterMaster Adat a Scenario 2 ProFire 2626 Slaved to an Optical InputMaster CD Player Scenario 3 ProFire 2626 Slaved to S/PDIF InputMidi Adat Connection Diagram and Example ScenariosProFire User Guide Hardware Input and Output Connections Example Scenario #1 Recording a DuoHardware Input Instrument Setting up the DSP Mixer Configuring the Mixer, Router, and Settings tabsRouting the DSP Mixer outputs Disabling unused input ports Using the DSP Mixer to create Cue MixesFront Left Front Right Example Scenario #2 Mixing in SurroundHardware Output Destination Speaker Configuring the Mixer, Router, and Settings tabsConfiguring and Using your DAW to create a Surround Mix Problem No sound TroubleshootingProblem No visual activity on Signal/Clip LED indicators ProFire User Guide Warranty Terms Warranty Registration Warranty9329-65015-00
Related manuals
Manual 52 pages 1.3 Kb

2626 specifications

The M-Audio 2626 is a versatile audio interface designed to cater to the needs of music producers, engineers, and podcasters. With its robust feature set, it provides an excellent solution for capturing high-quality audio in both studio and live environments. One of its main attributes is the capability of handling up to 26 inputs and 26 outputs, making it particularly suitable for complex recording sessions involving multiple microphones and instruments.

A standout feature of the M-Audio 2626 is its high-resolution audio conversion, supporting 24-bit depth and sample rates up to 192 kHz. This ensures that recordings maintain clarity and detail, which is essential for professional audio production. The unit employs advanced A/D and D/A conversion technologies, which contribute to its low noise levels and high dynamic range, ensuring your audio is free from distortion.

Connectivity is another strong point. The M-Audio 2626 features a combination of both analog and digital inputs, including eight XLR/TRS combo inputs with phantom power for condenser microphones. This flexibility allows users to integrate various sound sources easily. Additionally, the device includes multiple MIDI inputs and outputs, supporting the integration of MIDI controllers and other gear for comprehensive music production setups.

The interface is equipped with a user-friendly control panel, enabling straightforward navigation through its routing features and settings. Users can easily control levels, monitor audio through reliable headphone outputs, and make adjustments on-the-fly, which is crucial in dynamic recording environments.

In terms of compatibility, the M-Audio 2626 works seamlessly with major digital audio workstations (DAWs) across both Mac and PC platforms. Its class-compliant USB interface allows for quick connection without the need for additional drivers, facilitating an efficient workflow right out of the box.

The device’s rugged design is built to withstand the rigors of daily use, making it an ideal choice for both studio settings and on-the-road applications. Its compact form factor also ensures it won’t take up too much space in your gear bag.

Overall, the M-Audio 2626 stands out as a powerful audio interface that combines high-quality audio performance with a flexible and intuitive design. Whether you're a seasoned professional or an enthusiastic beginner, this interface provides the tools necessary to elevate your audio production experience.
Top Page Image Contents