Samsung RS844CRPC5A/ZA manual Setting UP the Refrigerator Doors, Levelling the Refrigerator

SETTING UP THE REFRIGERATOR
DOORS	(1)

If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.

Removing the Freezer Doors

1.Disassemble the hinge cover ( 1 ) with a screwdriver while the door is open and then close the door, and then disconnect the wires by gently pulling them apart ( 2 ).

(1) (2)

2.Removing the FIXER HINGE ,and next take off the upper hinge. Be careful that the door does not fall on you as you are removing it.

Be sure to keep track of all parts you are CAUTION removing.

3.Next, remove the door from the lower hinge ( 3 ) by carefully lifting the door straight up ( 4 ).

(4)

(3)

Reattaching the Freezer Doors

To reattach the freezer doors, replace parts in reverse order.

Removing the Fridge Door

1.Disassemble the hinge cover ( 1 ) with a screwdriver while the door is open and then close the door.

2. Removing the FIXER HINGE ,and next take off
the upper hinge. Be careful that the door does
not fall on you as you are removing it.	01
	SETTING UP
Be sure to keep track of all parts you are
CAUTION removing.

3.Remove the door from the lower hinge ( 2 ) by lifting the door straight up ( 3 ).

(3)

(2)

Reattaching the Fridge Door

To reattach the fridge doors, replace parts CAUTION in reverse order.

LEVELLING THE REFRIGERATOR

If you install the refrigerator on an uneven fl oor, it may cause a height difference between the doors.

When the Freezer part is lower than the Fridge part.

Insert a fl at-head screwdriver into the hole of the adjustable leg at the bottom of the freezer door and turn it clockwise.

setting up _07

DA99-03327N-1 EN.indd 07 2012.3.5 4:55:51 PM