Samsung AP0AS0ANXSG General information, Installing the unit, Accessing its internal components

Page 22

INSTALLATION PARTS

Safety precautions

Carefully follow the precautions listed below because they are essential to guarantee the safety of the equipment.

 

• Always disconnect the air conditioner from the power supply before servicing it or

WARNING

 

accessing its internal components.

•

Verify that installation and testing operations are performed by qualified personnel.

 

•

Verify that the air conditioner is not installed in an easily accessible area.

 

 

 

General information

ffCarefully read the content of this manual before installing the air conditioner and store the manual in a safe place in order to be able to use it as reference after installation.

ffFor maximum safety, installers should always carefully read the following warnings.

ffStore the manual in a safe location and remember to hand it over to the new owner if the air conditioner is sold or transferred.

ffThis manual explains how to install an indoor unit with a split system with two SAMSUNG units. The use of other types of units with different control systems may damage the units and invalidate the warranty. The manufacturer shall not be responsible for damages arising from the use of non compliant units.

ffThe manufacturer shall not be responsible for damage originating from unauthorized changes or the improper connection of electric and hydraulic lines. Failure to comply with these instructions or to comply with the requirements set forth in the“Operating limits” table, included in the manual, shall immediately invalidate the warranty.

ffThe air conditioner should be used only for the applications for which it has been designed: the indoor unit is not suitable to be installed in areas used for laundry.

ffDo not use the units if damaged. If problems occur, switch the unit off and disconnect it from the power supply.

ffIn order to prevent electric shocks, fires or injuries, always stop the unit, disable the protection switch and contact SAMSUNG’s technical support if the unit produces smoke, if the power cable is hot or damaged or if the unit is very noisy.

ffAlways remember to inspect the unit, electric connections, refrigerant tubes and protections regularly. These operations should be performed by qualified personnel only.

ffThe unit contains moving parts, which should always be kept out of the reach of children.

ffDo not attempt to repair, move, alter or reinstall the unit. If performed by unauthorized personnel, these operations may cause electric shocks or fires.

ffDo not place containers with liquids or other objects on the unit.

ffAll the materials used for the manufacture and packaging of the air conditioner are recyclable.

ffThe packing material and exhaust batteries of the remote controller(optional) must be disposed of in accordance with current laws.

ffThe air conditioner contains a refrigerant that has to be disposed of as special waste. At the end of its life cycle, the air conditioner must be disposed of in authorized centers or returned to the retailer so that it can be disposed of correctly and safely.

Installing the unit

IMPORTANT: When installing the unit, always remember to connect first the refrigerant tubes, then the electrical lines. Always disassemble the electric lines before the refrigerant tubes.

ffUpon receipt, inspect the product to verify that it has not been damaged during transport. If the product appears damaged, DO NOT INSTALL it and immediately report the damage to the carrier or retailer (if the installer or the authorized technician has collected the material from the retailer.)

ENGLISH

21

PAC_아프리카 중동향AP80S0A_IBIM_34514A-02_EN.indd 21

2015-04-23 오후 2:18:56

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Questions or COMMENTS? 08000-7267864Air Conditioner Thank you for purchasing this Samsung productFeatures of your new air conditioner ContentsXXFailing to do so may result in electric shock or fire Safety precautionsImportant safety symbols and precautions XXThis may result in electric shock or fireFor Power Supply XXWhen there is fire, this may cause spread of fireDo not operate the appliance with wet hands Do not place objects or devices under the indoor unitXXThis may result in electric shock Do not clean the inside of the air conditioner by yourself Do not drink the water from the air conditionerOperational temperature and humidity range Using outdoor unitChecking the auxiliary power switch Auxiliary power switch Elcb Earth Leakage Circuit BreakerMain parts Viewing the partsTo open the panel Locking the control panel Control panel and the displayUsing the air conditioner with the control panel Remote controller button Checking the remote controllerInstalling the batteries Auto Basic operationCool DryPress Button to adjust the desired temperature Press Button to start the operation of the air conditionerPress Adjusting the air flow directionTurbo operation Operation will operate for 30 minutesSmart saver operation Timer functionPress the button when the air conditioner is on You can turn the air conditioner off at your desired timeCleaning the outdoor unit heat exchanger Cleaning and maintaining the air conditionerCleaning the indoor unit Service centerCleaning the air filter Maintaining the air conditioner Periodical checksTroubleshooting Clean the air filter if it is dirty If the message See if the timer is already setFunction Accessing its internal components Installing the unitGeneral information Make sure that you earth the cables Power supply line, fuse or circuit breakerDo not install the air conditioner in following places Complete, electric shock or fire may occurWhen moving with a fork lift Preparation for installationWhen moving with a crane Indoor outdoor unit type and combinationDeciding on where to install the product Indoor unitOutdoor unit Fix the wire on the groundWires on the wall Personal injury or property damageSelecting appropriate location for installation Wear protective goggles and mask before spraying When 3 sides of the outdoor unit are blocked by the wall When there are no tall obstacles around the outdoor unitWhen the air outlet is opposite the wall Space requirementsWhen installing 1 outdoor unit When there is tall obstacle around the outdoor unitPipe length between the indoor and the outdoor unit Installing the outdoor unit in harsh environments Preparing the installationInstalling duct for horizontal exhaust discharge When installing ductsInstalling indoor unit Installing outdoor unit AP80S0XOutdoor unit base mount and anchor bolt position Removing the connection pipe Connecting the pipesRefrigerant piping work InjuryOutdoor unit pipe connection AP80S0X Keep the pipe length as short as possibleModel name Liquid side mm Gas side mm Selecting refrigerant pipeTemper grade and minimum thickness of the refrigerant pipe Outer diameter mm/inch Minimum thickness mm Temper gradeNitrogen flushing brazing Direction of the pipe when brazingStoring refrigerant pipe Stored place Stored time Sealing typeOuter diameter Dmm Cutting or flaring the pipesCorrect Inclined Damaged surface Cracked Uneven thickness Pipe bending Connecting the drain hoseTightening flare connection part Piping materialFfPipe insulation Selecting the insulator of the refrigerant pipeInsulating refrigerant pipe To prevent moisture from enteringWiring work Electrical workPower supply and wire specification 0Not includedConnecting power and communication cable AP80S0A / AP0AS0ASelecting solderless ring terminal Fixing the power cable Connecting the power terminalScrew Tightening torque kgf∙cm When using the exclusive terminal for grounding Grounding the power cableFfGrounding must be done by installation specialist Grounding workFfMake sure that grounding work is done in below procedure Grounding work procedureIf you are using the grounding on the switching board Procedure ExplanationGas leak test and vacuum drying Refrigerant charging How to add refrigerantAllowable refrigerant pipe length Setting the main PCB option Setting the option switches & function keysSetting the option switch of the indoor unit K1 K2 K3 K4Segment display Setting the outdoor unit KEYK2 Number of pressing Display PressingCheck lists after completing the installation Trial operation Trial operationInspection before trial operation Make sure that all the indoor units are properly operatingError display Error description Error diagnosisError display LED displayHow to connect your extended power cables Twist the wire cores together and push it in to the sleeveInsulation tape

AP0AS0ANXSG specifications

The Samsung AP0AS0ANXSG is a cutting-edge appliance that showcases the brand's commitment to innovation and excellence in technology. As a prominent player in the consumer electronics market, Samsung continues to push the boundaries of what is possible, and the AP0AS0ANXSG is a testament to that ethos.

One of the standout features of the AP0AS0ANXSG is its advanced energy efficiency. This appliance utilizes state-of-the-art technologies to consume less power while delivering exceptional performance. With energy-saving modes and automatic adjustments based on usage patterns, it not only minimizes electricity costs but also reduces environmental impact, aligning with sustainable living practices.

The appliance incorporates SmartThings technology, allowing users to control and monitor it remotely through their smartphones. This integration provides unparalleled convenience, enabling users to adjust settings, receive alerts, and even troubleshoot issues while away from home. The seamless connectivity enhances user experience, making it easier than ever to fit modern appliances into a busy lifestyle.

Design-wise, the AP0AS0ANXSG boasts a sleek and modern aesthetic that complements any home décor. Its ergonomic features include easy-to-use controls and a user-friendly interface that simplifies operation. Additionally, its compact size makes it suitable for various living spaces without compromising on performance or capacity.

In terms of performance, the AP0AS0ANXSG excels in delivering high-quality results. Whether it's cooking, cleaning, or other functions, this appliance is engineered to perform efficiently and effectively. The latest technology ensures that tasks are completed quickly, saving users valuable time.

Safety features in the AP0AS0ANXSG are also noteworthy. With multiple safety mechanisms, users can have peace of mind while using the appliance. These features are essential in households with children or pets, enhancing overall safety without sacrificing convenience or functionality.

Moreover, the AP0AS0ANXSG is designed to last, utilizing durable materials and components that withstand regular use. Samsung's reputation for reliability is evident in the construction of this appliance, contributing to its longevity and sustained performance over time.

In summary, the Samsung AP0AS0ANXSG is an exemplary appliance that incorporates energy efficiency, smart technology, aesthetic appeal, safety features, and robust performance. It represents a blend of style and functionality, making it a worthwhile investment for consumers seeking advanced solutions in their homes. With its innovative approach, Samsung continues to lead the industry, offering products that align with contemporary needs and preferences.
Top Page Image Contents