Samsung AP0AS0ANXSG manual Connecting the power terminal, Fixing the power cable

Page 45

Wiring work

Connecting the power terminal

ffConnect the cables to the terminal board with solderless ring terminals.

ffOnly use the certified and rated cables and make sure to firmly connect them without applying any external force to the terminal.

ffConnect with a driver and a wrench that are able to apply the rated torque to the screws.

fIfthe terminal is loose, fire can occur due to arc heat generation. However, If the terminal is connected too firmly, the terminal may get damaged.

Solderless

Cable tie

terminal

 

 

Thin cable

 

Thick cable

When connecting to cables to one

terminal, separate the solderless terminal up and down to prevent it from creating any gap. Place the thin cable on top and the thick cable on the bottom. Secure the power cable with the cable tie.

Screw

Tightening torque (kgf∙cm)

M3

5.0~6.0

M3.5

8.0~10.0

M4

12.0~15.0

 

 

M5

20.0~25.0

 

 

M6

25.0~30.0

 

 

• When removing the outer sheath of the power supply cable, be careful not to scratch the inner sheath of the cable.

CAUTION • Make sure that more than 20mm of the outer sheath of the indoor unit power supply cable and communication cable are inside the electrical component box.

• Install the communication cable separately from power cable and other communication cables.

Fixing the power cable

1.Fix the power cable with a cable tie as shown in the figure.

2.Fix the housing, which has an insulator, to the terminal board.

Rubber

Cable tie

Insulator Housing

Try to avoid each power cables from touching the refrigerant pipes. CAUTION • Arrange the cables by using knock-out hole.

44

PAC_아프리카 중동향AP80S0A_IBIM_34514A-02_EN.indd 44

2015-04-23 오후 2:18:59

Image 45
Contents 08000-7267864 Questions or COMMENTS?Thank you for purchasing this Samsung product Air ConditionerContents Features of your new air conditionerImportant safety symbols and precautions Safety precautionsXXFailing to do so may result in electric shock or fire XXThis may result in electric shock or fireXXWhen there is fire, this may cause spread of fire For Power SupplyDo not place objects or devices under the indoor unit Do not operate the appliance with wet handsXXThis may result in electric shock Do not drink the water from the air conditioner Do not clean the inside of the air conditioner by yourselfChecking the auxiliary power switch Using outdoor unitOperational temperature and humidity range Auxiliary power switch Elcb Earth Leakage Circuit BreakerViewing the parts Main partsTo open the panel Control panel and the display Locking the control panelUsing the air conditioner with the control panel Checking the remote controller Remote controller buttonInstalling the batteries Cool Basic operationAuto DryPress Button to start the operation of the air conditioner Press Button to adjust the desired temperatureTurbo operation Adjusting the air flow directionPress Operation will operate for 30 minutesPress the button when the air conditioner is on Timer functionSmart saver operation You can turn the air conditioner off at your desired timeCleaning the indoor unit Cleaning and maintaining the air conditionerCleaning the outdoor unit heat exchanger Service centerCleaning the air filter Periodical checks Maintaining the air conditionerTroubleshooting See if the timer is already set Clean the air filter if it is dirty If the messageFunction Installing the unit Accessing its internal componentsGeneral information Do not install the air conditioner in following places Power supply line, fuse or circuit breakerMake sure that you earth the cables Complete, electric shock or fire may occurWhen moving with a crane Preparation for installationWhen moving with a fork lift Indoor outdoor unit type and combinationIndoor unit Deciding on where to install the productWires on the wall Fix the wire on the groundOutdoor unit Personal injury or property damageSelecting appropriate location for installation Wear protective goggles and mask before spraying When the air outlet is opposite the wall When there are no tall obstacles around the outdoor unitWhen 3 sides of the outdoor unit are blocked by the wall Space requirementsWhen there is tall obstacle around the outdoor unit When installing 1 outdoor unitPipe length between the indoor and the outdoor unit Installing duct for horizontal exhaust discharge Preparing the installationInstalling the outdoor unit in harsh environments When installing ductsInstalling outdoor unit AP80S0X Installing indoor unitOutdoor unit base mount and anchor bolt position Refrigerant piping work Connecting the pipesRemoving the connection pipe InjuryKeep the pipe length as short as possible Outdoor unit pipe connection AP80S0XTemper grade and minimum thickness of the refrigerant pipe Selecting refrigerant pipeModel name Liquid side mm Gas side mm Outer diameter mm/inch Minimum thickness mm Temper gradeStoring refrigerant pipe Direction of the pipe when brazingNitrogen flushing brazing Stored place Stored time Sealing typeCutting or flaring the pipes Outer diameter DmmCorrect Inclined Damaged surface Cracked Uneven thickness Tightening flare connection part Connecting the drain hosePipe bending Piping materialInsulating refrigerant pipe Selecting the insulator of the refrigerant pipeFfPipe insulation To prevent moisture from enteringElectrical work Wiring work0Not included Power supply and wire specificationAP80S0A / AP0AS0A Connecting power and communication cableSelecting solderless ring terminal Connecting the power terminal Fixing the power cableScrew Tightening torque kgf∙cm FfGrounding must be done by installation specialist Grounding the power cableWhen using the exclusive terminal for grounding Grounding workIf you are using the grounding on the switching board Grounding work procedureFfMake sure that grounding work is done in below procedure Procedure ExplanationGas leak test and vacuum drying How to add refrigerant Refrigerant chargingAllowable refrigerant pipe length Setting the option switch of the indoor unit Setting the option switches & function keysSetting the main PCB option K1 K2 K3 K4K2 Number of pressing Setting the outdoor unit KEYSegment display Display PressingCheck lists after completing the installation Inspection before trial operation Trial operationTrial operation Make sure that all the indoor units are properly operatingError display Error diagnosisError display Error description LED displayTwist the wire cores together and push it in to the sleeve How to connect your extended power cablesInsulation tape

AP0AS0ANXSG specifications

The Samsung AP0AS0ANXSG is a cutting-edge appliance that showcases the brand's commitment to innovation and excellence in technology. As a prominent player in the consumer electronics market, Samsung continues to push the boundaries of what is possible, and the AP0AS0ANXSG is a testament to that ethos.

One of the standout features of the AP0AS0ANXSG is its advanced energy efficiency. This appliance utilizes state-of-the-art technologies to consume less power while delivering exceptional performance. With energy-saving modes and automatic adjustments based on usage patterns, it not only minimizes electricity costs but also reduces environmental impact, aligning with sustainable living practices.

The appliance incorporates SmartThings technology, allowing users to control and monitor it remotely through their smartphones. This integration provides unparalleled convenience, enabling users to adjust settings, receive alerts, and even troubleshoot issues while away from home. The seamless connectivity enhances user experience, making it easier than ever to fit modern appliances into a busy lifestyle.

Design-wise, the AP0AS0ANXSG boasts a sleek and modern aesthetic that complements any home décor. Its ergonomic features include easy-to-use controls and a user-friendly interface that simplifies operation. Additionally, its compact size makes it suitable for various living spaces without compromising on performance or capacity.

In terms of performance, the AP0AS0ANXSG excels in delivering high-quality results. Whether it's cooking, cleaning, or other functions, this appliance is engineered to perform efficiently and effectively. The latest technology ensures that tasks are completed quickly, saving users valuable time.

Safety features in the AP0AS0ANXSG are also noteworthy. With multiple safety mechanisms, users can have peace of mind while using the appliance. These features are essential in households with children or pets, enhancing overall safety without sacrificing convenience or functionality.

Moreover, the AP0AS0ANXSG is designed to last, utilizing durable materials and components that withstand regular use. Samsung's reputation for reliability is evident in the construction of this appliance, contributing to its longevity and sustained performance over time.

In summary, the Samsung AP0AS0ANXSG is an exemplary appliance that incorporates energy efficiency, smart technology, aesthetic appeal, safety features, and robust performance. It represents a blend of style and functionality, making it a worthwhile investment for consumers seeking advanced solutions in their homes. With its innovative approach, Samsung continues to lead the industry, offering products that align with contemporary needs and preferences.